开云体育

PA3DUV escribi: And nothing else working from the same line. :) Best regards Guillermo - LU8EYW.

I was having problems with my ISP, it seems it implemented a very agressive SPAM filter, so I was not receiving all posts since three weeks ago or so. Best regards Guillermo - LU8EYW.

Rich, I forget what they call that now, but they sure are! There's a minimum you pay whether you use it or not. Best, Will to over

Can anyone tell me how to select unmarked wafer switches for RF switching, such as e-shopping at Surplus Sales? What is the general rule regarding contact spacing vs HV? If unmarked, how do I get into

Denny, A rotary converter (pony motor) is the only way to do it correctly. A static converter is simply a started capacitor bank to get the motor up to speed then it drops out letting the motor run on

See Below, offering out other CB I've not had the chance to read that one. What was it about? the

Sometimes, a 3-0 service has a monthly minimum charge that will blow the hat clean off of one's head.

Being that my Bridgeport mill is 1.5 HP, I use a rotary convertor to change the 220X1 to 220X3... Not perfect but it works... I did consider asking Consumers Power Co. to give me a price for 3 phase

Yeah, that's what I am doing... We quickly metered the remaining four... They are good, but two had drifted out of the 5% range a small amount and two were still in range... Each one is dissipating

He is one of our "recognized amplifier experts". - Tom Rauch, W8JI, Nov. 1994 *QST* magazine And he has not yet taken a class in alternating-current circuit analysis.

Mike, The kicker is, this un-named moderator said "You have been given a wide degree of latitude - wider than many others". For what, offering technical advice to any who asked for it? They also said

A 3 phase service is mighty fine to have if one can afford to have it put in. I've not checked on the price in a while, but back in 1985, a 200 amp 220 volt service ran around $2000 from the power

Could well be. chortle. The laugher is that the "Administrator" / censor who jackboots folks out of AMPS for not giving a callsign, does not give a callsign himself. If Tom joins this discussion

Some of those with good technical knowledge are Tom's pals. My take on Tom is that he attracts people who share a common element in their childhoods. Apparently, the attraction is so strong that a

Will, et al, I challenged the 'administrator' about what calls for being banned from the list. Included were email lists and having a 'lack' of a call sign. Neither one, I pointed out were part of the

I know of several that tried and the post never made it. Two did, but the rest went bye bye. The unnamed, "no-callsign either" moderator, who was on me about showing a callsign, has his eye on every

reputation for opening up - even when operated well within the mfg's max-V rating. ### depends how they are mounted and or supported. The newer 5% tol units made by Ohmite, IRC, clarostat, dale etc...

Om SSB, it's about a third of that. My receiver has a tunable IF, so i could hear through the zero beat He did not have noticeable ripple with voice modulastion.