开云体育

wrote: had been kicked off, Tom wrote back to me the reasons he was kicked off for, before it ever showed up on the reflector that he was gone. The admin guy didn't answer me until the next day. If

Hi Bill: From an intellectual perspective I agree with you. From a practical perspective I do not. As I get older I lose interest in the theory and just want a practical solution. Just tell me what

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ham_amplifiers group. File : /DSCN6549.MOV Uploaded by : pa3duv <pa3duv@...>

ORIGINAL MESSAGE: <carcia@...> wrote: ------------ REPLY FOLLOWS ------------ In the last year my tower has taken two direct lightning strikes which tripped a 30 amp breaker each time.

ORIGINAL MESSAGE: <w5uc@...> wrote: ------------ REPLY FOLLOWS ------------ With all due respect Mike, I think you are missing the importance of these "month-long" debates. In my view, whenever

ORIGINAL MESSAGE: ------------ REPLY FOLLOWS ------------ Bingo. Bill, W6WRT

ORIGINAL MESSAGE: <aa6e@...> wrote: ------------ REPLY FOLLOWS ------------ I agree 100%, but a distinction needs to be made between "personal grudge matches" and a spirited debate. I

Thanks to Mike, and at his expense, I am posting this correction: The antenna reflector address should be http://groups.google.com/group/rec.radio.shortwave?lnk=gschg&hl=en John, N9RF

Hal, The softstarter in the Emtron amps is a phase control triac system, not a zero crosser. It allows gradually more of the primary AC sinewave into the powersupply. By doing so there is no need for

Agreed. cheerz

G'day, Alek. Be careful what you say here because there is no censor to protect us from shooting our mouths off. cheerz R L MEASURES, AG6K. 805-386-3734 r@...

Thanks, Jim. Was the story about him dying in a car crash true or just a coverup?

good news, tnx. Why not?, it's a more capable tube. My dot matrix printer worked - but now it's gone. The only question is how to bring the output down to 2500vdc. cheers, Paul

Mike -- In the Fall of 1996, when I accepted W8JI's challenge to debate him about parasites on the Internet on rec.amateur- radio.homebrew, I received an e-mail from a Ham in NYC advising me of

Good Morning John & all: Thanks for the good info. Someone sent me the info on Topband and it looks like a great reflector. I have a copy of ON4UN's book but it is right at 20 years old. (Do you

Hi Mike, Arguably, the printed authority is ON4UN's Low Band DXing - an informative read. On the internet there is, the Topband Reflector, topband@... and others on Contesting.com. A good

Peter I would like to see a schematic of that one. Funny I was just looking at the specs of the 4cx350. I'm not sure if I want to build an IPA of drive the grid. GG is very stable but needs a lot of

Perhaps the thread should be retitled "Irresponsible conjecture revealed." 73 and QRT de N4ZR .At 03:24 AM 9/21/2006, Jan Erik Holm wrote:

Yeah, and he's here now. G'day from downunder. 73, Alek VK6APK http://www.qrz.com/vk6apk