开云体育

Glad all is good now Jim! ?Good luck on the contest this weekend! Sent from the all new AOL app for iOS

I thought I should let the group know that the issue with the TL-922 has been resolved. The problem was with the phono jack that the keying line from the transceiver plugs into. The center conductor

I plan on fixing stuff till I can’t , I really enjoy it. If or when my soldering skills go to crud, that will be when it’s time to call it quits. I’ve seen a lot over the years. ? 2024-10-19

Lou, If only to be a fly on the wall! Amp Guy, You mentioned soldering. I remember B4 I retired working in the automotive field, watching pretty good mechanics soldering, was, well, lets just say

Thank you for those details. I don't plan on making any more modifications to this amp. It has been performing well for the 12 years that I have owned it.? My only goal is to keep it running. Right

I wasn’t going to bake any names The original owner blew finals in one radio, second owner blew finals in two radios. I suspect the original t/r relay board to have been the culprit that caused the

John, that was an amplifier that belonged to me. ?I was sent an AL1200by a person up north of here to look at, he claim the amp was was problematic. ?I told him how to pack the tube for safe trip

Don’t be bashful - tell us all who ?

Take a guess on who did the prior work to the al1500 I repaired in my last video on YouTube.

Some people lengthen the key line wire so they can add a standby operate switch, they also may be staring with a inferior kit or have other existing problems in the pa to start with If I lengthen the

Lou, If it is all right with you, I will email you directly about this behavior. With the CQ World Wide DX Contest coming up next weekend, I'm thinking I would like to order a replacement soft key

Could you elaborate on what "installing the proper way" is? Without those details, this statement is not very useful. -- Jim McPhee Placitas, NM W5ABA

I have installed literally hundreds of soft key kits, I have yet to have an issue in any band 160-10. But I’m installing the proper way.

Yes I remember and you did a great job documenting all that!!! ?Great job. ?Yup it’s crazy that things happen when just moving stuff around. ?But stranger things happen. ?If it’s the soft key

Thanks Lou. I'll get the schematic out and investigate that circuit. I know it is not likely to have anything to do with it having been disconnected and moved for a couple of days but I can't help but

Obviously the key line is shorted to ground if you pulled the key line out then the short is inward of the amp somewhere on the key line, could be a shorted mosfet in a softkey if you have one.

My TL-922A, which has been working flawlessly for quite some time, is now going into transmit mode as soon as the switch is changed from standby to operate. What has changed is I rearranged the shack,

Thinking about buying a bla-350 to use with my ten-tec Omni VI plus. Has anyone used a 350? Is it a decent amp? 73's Mike

The amp uses a PI network.? ?Most ant tuners use a T network.

Joe, I can't answer like some of the guys here but I do know on the lower bands the plate is extremely broad and narrows as you go up in frequency. Bob W4JFA [email protected]> wrote: