开云体育

Time zone?

Jay Maynard All Messages By This Member #4125 OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard
Matthew T. Kromer All Messages By This Member #4126 开云体育 I don’t think you can. ?I remember writing a CP mod for VM/ESA 2.2 ish that added per-VM time zones clock offsets but I don’t have that mod available. toggle quoted message Show quoted text On Apr 9, 2022, at 1:15 PM, Jay Maynard <jaymaynard@...> wrote: ? OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard
gdblodgett All Messages By This Member #4127 开云体育 Hi Jay, The CP source member is DMKSYS ASSEMBLE.? To change it requires a re-assembly of the module and a rebuild of the Nucleus.? The information can be found in the IBM Virtual Machine Facility/370: Planning and System Generation Guide GC20-1801-10.? Not for the faint of heart, but with a good backup, its do-able. Regards, Gary On 4/9/22 13:15, Jay Maynard wrote: toggle quoted message Show quoted text OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard
Joe Monk All Messages By This Member #4128 SYSGEN for CP. Macro is SYSTIME. Page 175 in this book... Joe toggle quoted message Show quoted text On Sat, Apr 9, 2022 at 12:15 PM Jay Maynard <jaymaynard@...> wrote: OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard
[email protected] All Messages By This Member #4129 Jay, I can confirm that the CP file to change is DMKSYS ASSEMBLE. You will need to check which is the current file. I am in the process of changing my 3 pack, 4 packs, 5 packs and 6 packs to have the line:- SYSTIME ZONE=1,LOC=EAST,ID=BST . Having done that you need to assemble the file using VMFASM DMKSYS DMKHRC and then generate the CP nucleus. Details of this for the 6 pack are in SYSPROG MEMO. I haven't yet looked at CE 1.1.1. Each build of VM370 seems slightly different. CE 1.1.1 seems to be detailed in MAINT MEMO. Chris -- <cjar1950@...> ---------------------------------------------------------------------------------------------------------------------------------- On Sat, 9 Apr 2022 13:53:15 -0500 "Joe Monk" <joemonk64@...> wrote: SYSGEN for CP. Macro is SYSTIME. Page 175 in this book... Joe On Sat, Apr 9, 2022 at 12:15 PM Jay Maynard <jaymaynard@...> wrote: OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard
Dave Wade All Messages By This Member #4130 开云体育 If you are running CE 1.1.1 then you need to follow the instructions in “MAINT MEMO B” otherwise, you will build a CP without the VM CE mods. ? Its pretty straight forward, should take about 10 minutes. ? Dave ? ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Joe Monk Sent: 09 April 2022 19:53 To: [email protected] Subject: Re: [h390-vm] Time zone? ? SYSGEN for CP. ? Macro is SYSTIME. Page 175 in this book... ? ? Joe ? On Sat, Apr 9, 2022 at 12:15 PM Jay Maynard <jaymaynard@...> wrote: OK, so for this VM n00b, how do I set the timezone like I would with PARMTZ in MVS? I'm using the CE 1.1.1 to run the TK4- system. I know the hardware TOD clock runs in GMT, but I'd like other things to run on CDT (GMT-5)...so, for example, the auto monitor start and stop runs at 9 and 5 like they're supposed to instead fo 4 and noon, and so on. -- Jay Maynard ?

Previous Topic Next Topic