This group is for all folks running the original IBM VM/370 Release 6 operating system (or later (e.g. VMTCE (Community Edition)) on Hercules. Like the other early IBM operating systems this version has always been in the public domain and so can be freely distributed. The base version as supplied by IBM is lacking in many facilities. IBM solved this by providing additional extension products which were licensed and so are not available. There are however many user enhancements available which can be installed. In addition, in order to get users up and running quickly updated "releases" of VM/370 included the most popular updates are available for download, so novices can start to learn VM without having to delve into the system internals. It is intended that this wiki will provide information on the base release and these updates.
The available versions are here :-
?
?
|
Re: CP SET PFnn COPY ccu
https://sdl-hercules-390.github.io/html/hercconf.html#device_types_table -- "Fish" (David B. Trout) Software Development Laboratories http://www.softdevlabs.com mail: fish@...
By
Fish Fish
·
#5778
·
|
|
Re: CP SET PFnn COPY ccu
It may be that if the OS supports printing to terminal-attached printers, x3270 could do this. It has, and can automatically invoke, pr3287 to provide attached-printer service. (pr3287 can also do
By
Dennis Boone
·
#5777
·
|
|
Re: CP SET PFnn COPY ccu
Bertram It copies to a 3270 family printer, so you would need a TN3270 program that supports printers. I don¡¯t see any support for 3270 printers in Hercules, but I don¡¯t see how you would be any
By
Dave Wade
·
#5776
·
|
|
CP SET PFnn COPY ccu
Hello, I never had the opportunity to have a 3270 terminal printer during my time as a lead systems programmer at TI LICC or OCF Research Center. I'm wondering how to define this in the configuration
By
Bertram Moshier
·
#5775
·
|
|
I know we only have VMCF. Are there plans to add IUCV to VM/370 CE?
Hello everyone, I know we only have VMCF in VM/370 CE Version 1 Release 1.2.? Are there plans to add IUCV to VM/370 CE in a future release or version? Bertram Moshier
By
Bertram Moshier
·
#5774
·
|
|
Diskmap and close parenthesis ")"
Hello, 17:36:09 diskmap user (disk) 17:36:09 DISKMAP is running for USER ?DIRECT 17:36:09 Unknown option: ) 17:36:09 Error: Invalid option found 17:36:09 Ready(00001); T=0.05/0.06 17:36:09 The help
By
Bertram Moshier
·
#5773
·
|
|
Re: DIRECTMAP issue
[email protected]> wrote: No. It was still broken - the previous fix was insufficient. There is a good fix in the current "develop" branch of SDL Hyperion, but it didn't happen in time for 4.7. I'll
By
Ross Patterson
·
#5772
·
|
|
Re: DIRECTMAP issue
Hello Ren¨¦, I'm wondering what's going on. I'm using version 4.7.0.11119-SDL-gf7d2360a, but the comments say this is for pre-4.4.0. Did it get broken again by the time 4.7 rolled around? ECPSVM YES #
By
Bertram Moshier
·
#5771
·
|
|
Re: DIRECTMAP issue
[email protected]> wrote: I believe it is mentioned in the VM/370 Community Edition readme file, specifically citing the DISKMAP command. I am not aware of possible side effects of it, Turning off
By
Ross Patterson
·
#5770
·
|
|
Re: DIRECTMAP issue
Hercules 3.13. Ren¨¦ FERLAND, Montr¨¦al
By
Ren¨¦ Ferland
·
#5769
·
|
|
Re: DIRECTMAP issue
Hello, What version of Hercules do you use? Bert [email protected]> wrote:
By
Bertram Moshier
·
#5768
·
|
|
Re: DIRECTMAP issue
Yes, I have seen this issue, when using SDL Hercules. My solution to it is to uncomment the line # ECPSVM ? ? ? ?DISABLE DISP1 DISP2 in the file vm370ce.conf. I don't remember where I learned this
By
Ren¨¦ Ferland
·
#5767
·
|
|
Re: I forgot the VOLSER of drives (3380) I created
Hello Ren¨¦ of Montr¨¦al, I was able to get the fresh copy working. All sixteen 3380 drives mount to the system without a hitch. I wonder how I messed it up, but I did. Now, maybe, I'll start working
By
Bertram Moshier
·
#5766
·
|
|
DIRECTMAP issue
Hello, When I run DISKMAP again for the USER DIRECT FILE (adding only one new mini-disk (3380 001 for 121), I'm getting the following error: 01:56:39 ? ? ? ? ?PASCAL ? ? ?192 ? ? ?3350 ?
By
Bertram Moshier
·
#5765
·
|
|
Re: Trying to access 191 give DMSLIO109S
Bertram, This is why I never bother with large disks. CMS Minidisks are limited in size by the CMS 800-byte file system. You get a maximum of just under 64k 800 byte blocks per disk which is 115
By
Dave Wade
·
#5764
·
|
|
Re: Trying to access 191 give DMSLIO109S
You can create a mini-disk as large as the DASD but, from my quick test, the maximum number of 800 blocks for a mini-disk on a 3380 seems to be 65340, which corresponds to 121 cylinders. In other
By
Ren¨¦ Ferland
·
#5763
·
|
|
Re: I forgot the VOLSER of drives (3380) I created
As I wrote before, I tested on a freshly downloaded VM/370 CE R1.2. My pleasure. :-) Well, like me, try it on a freshly downloaded version of VM/370 CE R1.2. If it works there, then the problem lies
By
Ren¨¦ Ferland
·
#5762
·
|
|
Re: Trying to access 191 give DMSLIO109S
If I recall correctly, a 3380 only has 885 cylinders, not 886. (Unless you're using 'E' or 'K' models, but I'm not sure if VM/CE supports those.) [email protected]> wrote: -- Jeff Henry
By
Jeff Henry
·
#5761
·
|
|
Re: I forgot the VOLSER of drives (3380) I created
Hello Ren¨¦, Yeah, I need to agree with you both that it is something here and I have zero idea where to go from here. Are we running the same version of VM/CE even with fixes? I want to thank you for
By
Bertram Moshier
·
#5760
·
|
|
Trying to access 191 give DMSLIO109S
Hello, I'm getting DMSLIO109S when trying to access my 191 mini-disk. It is a 3380 (the entire drive 000 to 886). How large of a mini-disk does VM/CE support for 3380 DASD? Thank you.
By
Bertram Moshier
·
#5759
·
|