¿ªÔÆÌåÓý

  1. H390-Vm
  2. Messages
Messages Topics Expanded Polls
Date
Re: CLOAD EXEC
Rene, Thanks, I know I should have looked. I hope you can¡¯t hear me scream. So I also need to fix CMSCMDS and CPCMDS as both don¡¯t match what is installed¡­.. There is more paul stuff such as
By Dave Wade · #3876 ·
The EE editor
Folks, I seem to have found a quirk in the EE editor, or perhaps the "C" run time it depends on. If I edit an existing file. E.g. EE TEST FILE A Or EE TEST FILE The filemode is set to "A1" even if the
By Dave Wade · #3875 ·
Re: CLOAD EXEC
According to HELP CMSCMDS: CLOAD? ?Load a C program (compiled with GCCE) into memory. so Paul Edwards stuff.? :-) Cheers, Rene FERLAND, Montreal
By Ren¨¦ Ferland · #3874 ·
CLOAD EXEC
Folks, Does any one know what the "CLOAD" exec on the "Y" disk is for, or from whence it came. Dave
By Dave Wade · #3873 ·
Re: Using Hercules version specific config file parameters with VM370CE
Hi Bob, Fish and others, Please note that I'm including information provided by Fish is a newer post than this one... To summarize the posts and include additional information to the discussion.
By gdblodgett · #3872 ·
Re: Using Hercules version specific config file parameters with VM370CE
A very good new year to all of us, and thank you for this exemplary and very positive discussion. My point of view is this: although our efforts are focused on preservation of our heritage, this is
By [email protected] · #3871 ·
Re: Using Hercules version specific config file parameters with VM370CE
Bob Bolch wrote: And I compounded the difficulty by coding my HercGUI to summarily reject ARCHMODE (even though Hercules v4.x still accepts it (albeit with a deprecation warning)). And on my part as
By Fish Fish · #3870 ·
Re: Change to http://vm370.org/VM/V1R1.1
Dave Wade wrote: FYI: It was a mistake on my part for HercGUI to always reject ARCHMODE. I apologize for the grief/confusion it has caused the community. Since Hercules v4.x still accepts ARCHMODE in
By Fish Fish · #3869 ·
Using Hercules version specific config file parameters with VM370CE
I changed the subject line to be more specific. I caused the existing difficulty with ARCHLVL -vs- ARCHMODE because I thought that 3.13 supported both. That was an error on my part. However, there are
By Bob Bolch · #3868 ·
Re: Change to http://vm370.org/VM/V1R1.1
Joe, There is no need for two configs. The 6-pack was not designed to work with the FISH GUI and it only fails with the FISH GUI. A tweak to the fish GUI config allows it to works. Dave Sent: 02
By Dave Wade · #3867 ·
Re: Change to http://vm370.org/VM/V1R1.1
Dave, Maybe you should deliver two versions of the config file... One specifically for v4 (ARCHLVL) and one that is "general" (ARCHMODE). Or deliver one file with #ARCHMODE and tell the user to
By Joe Monk · #3866 ·
Re: Change to http://vm370.org/VM/V1R1.1
OK, perhaps "bigger" conversations are way above my "newbie" pay grade. Don't want to repeat what has already been decided. I make these comments as an innocent. I would limit them to the change to
By Anthony Smith · #3865 ·
Re: Problems with the LOG file
Sorry I should have said when running the six-packs and CE you get an empty log file.. Dave From: [email protected] <[email protected]> On Behalf Of Dave Wade via groups.io Sent: 02 January 2022 12:54
By Dave Wade · #3864 ·
Problems with the LOG file
Gentles, You get an empty log file with Hercules. I have raised and issue with a solution. https://github.com/s390guy/vm370/issues/62 Dave G4UGM
By Dave Wade · #3863 ·
Re: Change to http://vm370.org/VM/V1R1.1
Ant, The old version works with both 3.13 and 4.xx. The change to the new version was made because the FISH GUI objects to the old version. I believe the real fix is to tell people we don¡¯t support
By Dave Wade · #3862 ·
Change to http://vm370.org/VM/V1R1.1
I have devised several ways of automagically stepping over the issue that I bumped into running CE with 3.13. but using the KISS principle, perhaps a clearer statement on point 3 on this web page
By Anthony Smith · #3861 ·
Any old time VP/CSS folks out there
Understand this is off topic (admin pls bump if not OK). While playing with R1.V1.1 and simultaneously reading my VP/CSS command guide, I wondered if anyone else in the group used VP/CSS (derived from
By Anthony Smith · #3860 ·
Re: Building on macOS
Im going to move this over to the hercules-390 main group. Joe
By Joe Monk · #3859 ·
Re: Rexx PARSE on VM/SP 5 behaves different from BRexx on VM/370 CE V1M1R1.1. #VMCE
I missed that conversation. Sorry. Thanks for the update! ... Mark S.
By Mark A. Stevens · #3858 ·
Building on macOS
more 32-bit anything. Everything MAC is now 64-bit only. for a little while. BTDT, back when Apple went from PPC to Intel. Building a fat binary isn't hard, but it does take some preparation to make
By Jay Maynard · #3857 ·
2681 - 2700 of 6536