开云体育

I think so. Thats why it pauses after IPL so you can save the CMS segment Dave

[email protected]> wrote: Yes. That's specifically because CMS keeps a copy of the file directory of the S and Y disks in the saved system, so if you don't do this, the CMS users won't see the

The SAVESYS command *MUST* be *ONLY* entered at the 1st VM READ after the IPL command. If you wait until after the 1st ready message, then it won't work. The problem is that DMSINS has some additional

A useful way to avoid having to resave CMS all the time is to have an additional program disk to hold locally installed stuff that's not part of the base CMS installation. We used a minidisk that was

Yes I press enter. Is this the mistake I made? Marco

You didn't press enter at this point did you? On checking it needs to be straight after the IPL

typing error 2) copyfile myprogram a == z2 sorry Marco

Ok, I tryed ... 2) copyfile my program a = = z ... 3.4) access (noprof 3.5) savesys cms .... Now I get: DMSFRE161T INVALID DMSFRET CALL FROM F87AE8, ERROR NUMBER 5. DMSFRE164T LOW-CORE NUCLEUS STORAGE

Well it needs to mode 2 so the copy has to be = = z2... .. I then think you need "access (noprof" after the IPL and before the savesyd but on my phone so can't check manuals Dave [email protected]>

Here I am again to ask one last thing (I hope). From what I understand, when you want to move a program to minidisk MNT19E 19E Y/S to make it available to all other users, you have to (re)save the CMS

rexxtry REXX interpreter running (CMS bREXX 1.0.1 Jul ?5 2022) Enter any valid REXX instruction... type EXIT to quit. Rexxtry; '' DMSITP143T PROTECTION EXCEPTION OCCURRED AT F20A02 IN SYSTEM ROUTINE

Bob wrote NUCXTEXT ? as a replacement for NUCXLOAD. You can't have a NUCXLOAD because there are no relocatable modules.. ..I am not sure what the differences are between NUCXTEXT, NUCXLOAD and

It all depends on where one starts. I was looking at the Waterloo tapes for something else, saw RESLIB and remembered seeing it on CE, then the question asked here, and then reading the online HELP.?

Try "FSHELP RESLIB"? Its how BREXX is loaded. Dave

[email protected]> wrote: Yes. The SYSBPROF EXEC on the S-disk uses it to load the C library into memory if it can't be loaded as a shared segment. --Andy Hanushevsky, Cornell University >

Was the following mod installed into VM/370 CE? M0071V00RESLIB-- CMS Nucleus Resident Library. ?RESLIB is a CMS transient area program that allows a user to define commands which will be treated as

No need on VM. "CP Shutdown" is fine. MVS --> Man Versus System Dave

VM: Vicious mother, herself MVS: Mother's Vicious son, actual. ...Bertram M. WB8ERT >

From https://sdl-hercules-390.github.io/html/hercinst.html#commands stopall Stop all CPU's sysclear *System Clear Reset manual operation quit *Terminate the emulato exit (Synonym for 'quit') (*) Enter

bREXX release 1.1.1 is now available at https://github.com/RossPatterson/CMS-370-BREXX/releases/download/v1.1.1/BREXX.zip and at /g/h390-vm/files/BREXX/BREXX-1.1.1.zip. There are *NO*