开云体育

Man, I am so sorry to hear this.? I loved working with Bob when I was at CA.? He was one of the most talented and smartest people I've met.? He will be missed.

I bring sad tidings. Long-time VMer, SHARE VM stalwart, and member of this group Bob Bolch passed away on May 19th. Bob's brother Mike informed me that he died from an aggressive cancer. Bob had a

[email protected]> wrote: The negative interaction between BREXX and ECPSVM is extremely timing dependent. The ECPSVM DISP2 instruction damages certain floating point registers for the

Hello Mark, When I woked for Owens Corning Fiberglas Research Center as it lead systems programmer, I wrote a program to backup the spool space every hour. We didn't use it often, but it saved some

Many of the CMS commands, provided by IBM are documented to have that optional close parenthesis. Many of those I have talked with don't use it, and don't expect it to work. I have seen a very few

Have to admit I am puzzled, as I have run DISKMAP EXEC today, several times without problems, and have the following: [xmas@vm370dev pdf]$ grep -Ei 'ecpsvm'

You can see another discussion of the sequence here: /g/h390-vm/message/4517 This is kind of late in the game for us, but provides some background on the sequencing and why. See page

Decades ago I did some work with 3270 printers.? A printer is nothing more than another I/O addressable device.? Printing a 3270 monitor's screen contents was a local control unit function.? It was

Dave Wade wrote: Oh well. It was worth a shot. I wouldn't know. You would know more about that than me. [...]

Dave Wade wrote: [...] Have you tried doing a devinit? I am not familiar with Herc's existing 3287 support, but this sounds like a likely bug to me. I myself can't see the use of a 3287 AT ALL, let

Fish, Jay, Bertram, I really must learn to read things properly. So if I 1. Define a device in the Hercules config as a 3287 rather than a 3270, 2. Set the matching device in DMKRIO as a 3287 then

Jay, I defined it was defined as a 3284, but I now tried a 3287 and it still won’t connect. I assume like a 3270 display it should connect before VM is loaded… … but it doesn’t Dave Sent:

I would expect you'd need to define it in DMKRIO as a 3287, then. I don't have PCOMM, so can't try using it to connect a printer. I haven't tried pr3287 on Linux either. [email protected]> wrote:

Jay, This is VM. There isn’t a sysgen as such, just DMKRIO for real devices. There are no SNA devices or VTAM. I think there is a PR3270 equivalent, but I also think there was a 3270 printer driver

You can plug a printer or a terminal into any port on a 3x74. It's up to the host's software - typically, the sysgen or MVSCP for local non-SNA devices, along with VTAM - to treat it as a terminal or

Bertram, OK so I did some experimentation, but still need to do more work…. 1. In DMKRIO I defined device 0CF as a 3284 printer. 2. In the Hercules configuration file I defined 0CF as a 3270 with a

Gregg Levine wrote: [...] I don't understand what you're saying. Yes, a 3287 is indeed a printer: * GA27-3190-0 "3287 Printer Models 11 and 12 Component Description, page 1-1: "The IBM 3287 Printer

Hello! Give the Fish a bigger tank and rub my mascots ears for me. Because Fish one of the things I did notice early on is that the PR3287 device support is terminal only, and Hercules wasn't setup