开云体育

Jay, I defined it was defined as a 3284, but I now tried a 3287 and it still won’t connect. I assume like a 3270 display it should connect before VM is loaded… … but it doesn’t Dave Sent:

I would expect you'd need to define it in DMKRIO as a 3287, then. I don't have PCOMM, so can't try using it to connect a printer. I haven't tried pr3287 on Linux either. [email protected]> wrote:

Jay, This is VM. There isn’t a sysgen as such, just DMKRIO for real devices. There are no SNA devices or VTAM. I think there is a PR3270 equivalent, but I also think there was a 3270 printer driver

You can plug a printer or a terminal into any port on a 3x74. It's up to the host's software - typically, the sysgen or MVSCP for local non-SNA devices, along with VTAM - to treat it as a terminal or

Bertram, OK so I did some experimentation, but still need to do more work…. 1. In DMKRIO I defined device 0CF as a 3284 printer. 2. In the Hercules configuration file I defined 0CF as a 3270 with a

Gregg Levine wrote: [...] I don't understand what you're saying. Yes, a 3287 is indeed a printer: * GA27-3190-0 "3287 Printer Models 11 and 12 Component Description, page 1-1: "The IBM 3287 Printer

Hello! Give the Fish a bigger tank and rub my mascots ears for me. Because Fish one of the things I did notice early on is that the PR3287 device support is terminal only, and Hercules wasn't setup

https://sdl-hercules-390.github.io/html/hercconf.html#device_types_table -- "Fish" (David B. Trout) Software Development Laboratories http://www.softdevlabs.com mail: fish@...

It may be that if the OS supports printing to terminal-attached printers, x3270 could do this. It has, and can automatically invoke, pr3287 to provide attached-printer service. (pr3287 can also do

Bertram It copies to a 3270 family printer, so you would need a TN3270 program that supports printers. I don’t see any support for 3270 printers in Hercules, but I don’t see how you would be any

Hello, I never had the opportunity to have a 3270 terminal printer during my time as a lead systems programmer at TI LICC or OCF Research Center. I'm wondering how to define this in the configuration

Hello everyone, I know we only have VMCF in VM/370 CE Version 1 Release 1.2.? Are there plans to add IUCV to VM/370 CE in a future release or version? Bertram Moshier

Hello, 17:36:09 diskmap user (disk) 17:36:09 DISKMAP is running for USER ?DIRECT 17:36:09 Unknown option: ) 17:36:09 Error: Invalid option found 17:36:09 Ready(00001); T=0.05/0.06 17:36:09 The help

[email protected]> wrote: No. It was still broken - the previous fix was insufficient. There is a good fix in the current "develop" branch of SDL Hyperion, but it didn't happen in time for 4.7. I'll

Hello René, I'm wondering what's going on. I'm using version 4.7.0.11119-SDL-gf7d2360a, but the comments say this is for pre-4.4.0. Did it get broken again by the time 4.7 rolled around? ECPSVM YES #

[email protected]> wrote: I believe it is mentioned in the VM/370 Community Edition readme file, specifically citing the DISKMAP command. I am not aware of possible side effects of it, Turning off

Hercules 3.13. René FERLAND, Montréal

Hello, What version of Hercules do you use? Bert [email protected]> wrote:

Yes, I have seen this issue, when using SDL Hercules. My solution to it is to uncomment the line # ECPSVM ? ? ? ?DISABLE DISP1 DISP2 in the file vm370ce.conf. I don't remember where I learned this