开云体育

I am trying to run DOS/VS under VM/370 using the "5pack" downloaded from the same site as VM/370 CE. I was able to IPL successfully (as far as I can tell - new to DOS/VS so still wrapping my head

OK...ID10T error.? I got the file updated.

I found this thread from earlier in the year, so hope it is not too old to resurrect. I am also trying to update my SYSTEM NETID file on S. When I access the disk D (RW) and make the updates, then

I have the NJE connection between RSCS under VM CE 1.2 and MVS TK5 Update 2 running now.? I am using SDL Hercules 4.6. Thanks to all those who helped, offered help, and to Mr. Coghlan for the code.

Hi Daniel, I'd recommend that you use SDL Hercules 4.5 or 4.6; the TCPNJE driver is already in those releases and is stable.? I've been using NJE with SDL Hercules for since 2018.? The problem with

Thanks.? I'll reach out to Mr. Coghlan.

The NJE device code in Hyperion/Hercules 4.x is his code that he developed for 3.x. His NJE line driver for VM/370 will work with the NJE device in Hercules 4.x, but if you run into trouble and need

I am running Hercules 4.0, which seems to have the TCP NJE code built in.? It looks like the Peter Coghlan code was developed for Hercules 3.x.? Am I correct? If I am correct, is there a different

Context is everything, as the question is about MVS as a VM guest, asked in VM group. All working nicely here and thanks to the group for the assist.

You have a point and I agree. My suggestion was for the specific case of Daniel, and I used the verb "might consider" as, indeed, such a modification has an impact when TK5 is run standalone and would

That is probably not a good idea for the TK5 distribution at large as it is meant to be run standalone, outside of VM, where this would not be true. Adding VM is basically ignored when not running

You might also consider replacing SEP by NOSEP as VM/370 already provides a separator page when printing. :-) Cheers, Rene FERLAND, Montreal

Hi Daniel, Yes, the 'VM' keyword on the PRINTERx definition in JES2PARM is what enables that printer to be eligible to spool output back to the VM spool.? You can use the keyword on any and all

Working!? I already had what I needed, other than getting the jobcard correct. Thanks Bob!

Hi Bob: All the pieces appear to be installed already with TK5 Update 2. In JES2PARM, I see: PRINTER1?????? CLASS=A,SEP,AUTO,DSPLTCEL,NOPAUSE,UNIT=00E,DRAIN,?????? + UCS=QN,FCB=6,VM Is the

Hi Daniel, If you are using TK5 Update 2, you can spool MVS output back to your CMS userid automatically.? Basically, you need to put your CMS userid in your JOB statement (in the programmer name

Thank you Jim. That did occur to me.? I'm hoping for a more "elegant" solution.? I know back in the day in a multiuser situation there was a way via JCL to get the output back to my VM.? I just

You can spool 00E to your VM userid by logging on your MVS guest and issuing a #CP SPOOL 00E to yourid CONT NOHOLD

I'm again playing with MVS (TK5 Update 2) under VM/370 CE 1.2. I've succesfully submitted and executed a batch job from VM to MVS by punching it.? What I cannot figure out is how to tell the JCL to

DIRENT is what you're looking for (it's is not a REXX exec) -- Kris Buelens