开云体育

Hi problem, thanks Jeff. Yes there's something broken somewhere with that CTC code.? However, TCPNJE is the better way to go. Dutch

Hi Peter, Actually Dutch is my nickname, not a given name; and I have no relation to the nationality except I admire most aspects of your culture greatly. D

Sorry, I misspoke.? I took out and IPLed my SP5 image today and found that I'm using a VTAM CTC link to talk to VM/ESA and RSCS talks through VTAM.? I reconfigured RSCS on each end to use the CTC

If you want to try again, I have a VM/ESA to VM/SP5 CTCE connection in my network.? My SP5 is not HPO, but hopefully it's close enough.? We could compare configs and see what might be different.?

... with VM/ *S* P items ...

Hi Dutch, As the author of the CTCE code, I can confirm that RSCS connections between a VM/SP and VM/ESA using a CTCE link should work. The ATTNDELAY parameter on the VM/SP side was added some years

All, Thanks for the help.? I'm dropping this project and looking at another direction for providing a server on HNET. Dutch

It's VM/SP 5 HPO.? It does support NJE over 3088s according to the docs. and it "almost" works which it wouldn't if there was no hardware support.? It would abort on the START. VM/ESA doesn't

What version of VM/SP? Maybe you could try a BISYNC line and 2703 emulation? I’m very fuzzy on when 3088s were first supported by RSCS.

Playing around with the VM370CE. Got the APL that Bob Bolch put together.? The terminal has an APL option there. I'm using the OEC emulator (https://github.com/lowobservable/oec) and it does work

I could use a little help or advice from those more experienced with VM and RSCS than I am.? I'm almost there, but right at the end, things won't connect. Any advice would be greatly appreciated! The

Thank you all! Now everything falls into place! Best regards.

Hi Alejandro, create a regular user... So far, I see quite straightforward to add a but the interesting part of this is to provisioning, at least, a >MDISK entry to have an A unit where PROFILE EXEC

Alejandro, It is easy enough to add a new volume for the purpose of user minidisk space. Here are the basic steps. There are of course other variations or considerations depending on what else you

Alejandro, I don’t believe its necessary to mark space as PERM, but I usually do so for completeness. No need to format, just allocate. To get a disk mounted at startup I believe you need to add it

Hi all. I'm dealing with user management, and the first thing I want to do is to create a regular user... So far, I see quite straightforward to add a directory entry based on CMSUSER, linking CMS

Thanks! So far I have a cisco 7200, I've ordered a 4port serial card, a serial cable, and an old ISA IBM sdlc card.? So far all I have is the serial cable.? But I think this ought to be enough to

take a look at vtapeutils https://sourceforge.net/projects/vtapeutils/ I found this, might have some insight as well. https://www.jaymoseley.com/hercules/awstape_utilities/mawstape.htm I highly

Thanks!? Long time no see through the portals of time! I've been having this strange need to do some networking and after years of looking at a dlsw article, i've been trying to recreate it. Hercules

Gregg Levine wrote: [...] I always thought the "z" in z/VM and z/OS, etc. stood for "z/Architecture", IBM's 64-bit architecture (formerly known as ESAME" Enterprise Systems Architecture Modal