On Mon, Oct 7, 2024 at 01:16 PM, Daniel L. Srebnick wrote:
However, if I include a /*ROUTE PRINT RMT1 to send the output to my RJE80 remote, all is well.? This is just a guess, but perhaps there is too much data too fast coming back over the line from JES2 to RSCS and the code cannot handle it so it throw errors.
IIRC when you submit from a remote station (VM, or RJE) and you want the output back to that station, you need the /*ROUTE as you specified, otherwise it will attempt to print on the "local" MVS system, and it appears your LINE2 is set up for RMT02 not RMT1. Below is the TK4- configuration.
?
?RFEVIEW ?SYS1.JES2PARM(JES2PARM) - 1.02 ? ? ? ? ? ? ? ? ? ? ? ? ? Columns 1 72?
?Command ===> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Scroll ===> CS
?000149 *** ? ? ? * ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?000150 LINE2 ? ?UNIT=671,EBCDIC,TRANSP,HISPEED,FDUPLEX,NOADISC,CODEA,IFACEA ? ?
?000151 RMT2 ? ? 3780,NUMPR=1,LINE=2,NUMRD=1,NUMPU=1,TRANSP,NOTABS ? ? ? ? ? ? ?
?000152 R2.PR1 ? START,CLASS=XA,UCS=QN,FCB=6,SEP,AUTO,PRWIDTH=151 ? ? ? ? ? ? ??
?000153 R2.PU1 ? CLASS=B ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?000154 R2.RD1 ? CLASS=A ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?000155 DESTID NAME=RMT02,DEST=R2 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
?000156 *** ? ? ? * ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?
I Hope This Helps
?
?... Mark S.
?
Mark A. Stevens