Re: I almost didn't come home today - SAFETY!
wrote: teenager, it without I had my lockout hanging on my belt actually. I never work on electrical equipment without locking out and PROVING that the power is off. In this case though, why would
By
ghidera2000
·
#9700
·
|
Re: home-made signal generator question
By
dangermouse <dangermouse1956@...>
·
#9698
·
|
Re: I almost didn't come home today - SAFETY!
By
dangermouse <dangermouse1956@...>
·
#9697
·
|
Re: I almost didn't come home today - SAFETY!
Well, if you are only going to touch a thing like this lamp fixture which should never ever be at dangerous potential it is hard to do that. (e.g. where do you switch off before you touch the metal
By
Stefan Trethan <stefan_trethan@...>
·
#9696
·
|
Re: Flash programming specs
Looks like Flash is a type of EEPROM: http://www.webopedia.com/TERM/F/flash_memory.html http://www.webopedia.com/TERM/E/EEPROM.html Mike wrote: 28C256; these are EEPROMS, not FLASH EEPROMS, that are
By
MikeK
·
#9695
·
|
Re: flash memory
http://www.google.com/search?q=%22flash+memory%22&ie=UTF-8&oe=UTF-8 Regards, JJ
By
John Johnson <johnatl@...>
·
#9694
·
|
Re: SET TOP BOX
Your cable or satellite can replace your box if it isn't working. Regards, JJ
By
John Johnson <johnatl@...>
·
#9693
·
|
Re: I almost didn't come home today - SAFETY!
Sorry this happened to you. I got stuck on 320v when I was a teenager, fortunately my mother pulled me off of it. I was dying, and know it isn't any fun. This is why everyone should use lock-out
By
John Johnson <johnatl@...>
·
#9692
·
|
Re: Triac instead of relay ?
I really wonder if a power meter measures less than U*I. i think a power meter multiplies the two signals, so there shoul be nothing missed out... Still there is the question if there is any reactiv
By
Stefan Trethan <stefan_trethan@...>
·
#9691
·
|
interesting software
Here is an interesting layout software. www.pulsar.gs/nwc Richard
By
rekmac <rkonnen@...>
·
#9690
·
|
Re: Triac instead of relay ?
As you say, the turn on point shifted... but the turn off point does -not- shift. Still assuming totally resistive loads: Since the current in the load is in phase with the voltage on the load, but
By
Steven AE7HD
·
#9689
·
|
Re: I almost didn't come home today - SAFETY!
In a message dated 4/18/2004 3:00:47 AM Central Standard Time, logicresearch@... writes: Not earthing any fitting is beyond a joke and can result in loss of practicing license and a huge
By
JanRwl@...
·
#9699
·
|
Re: flash memory
google it's so easy.... http://computer.howstuffworks.com/flash-memory.htm . . . . murugaiyan mahalingam <murugaiyan_m@...> wrote: hai, what is flash memory. i thought it is used in cell
By
mario lopez
·
#9688
·
|
Re: SMD's(Thanks All)
Well I graduated in 1966. Took Electronics last 2 years of HS. Lost 2 good jobs during the mid 80's when all the companies were merging and again 2 jobs after 911 due to business going down. Decided
By
Kenneth Smith <kensmith52@...>
·
#9685
·
|
Re: SET TOP BOX
which set top box? where is the box set upon and what does it do? ST
By
Stefan Trethan <stefan_trethan@...>
·
#9684
·
|
flash memory
hai, what is flash memory. i thought it is used in cell phones. please share any technical idea. murugaiyan ________________________________________________________________________ Yahoo! India
By
murugaiyan mahalingam <murugaiyan_m@...>
·
#9683
·
|
SET TOP BOX
HAI, i don't have idea bout set top box. if anybody have please share ideas and complete discriptive material.actually i searched about set top box but not get any technical details murugaiyan
By
murugaiyan mahalingam <murugaiyan_m@...>
·
#9682
·
|
Re: Triac instead of relay ?
ya, that is correct but not only angle shift capacitor charging and rises the voltage level. In the inductive component rises the current level. i don't know how is it possible. but practically i feel
By
murugaiyan mahalingam <murugaiyan_m@...>
·
#9681
·
|
Re: SMD's
I also facing this problem everyday. i don't have any special equipment. anybody have some idea pl give that is very helpful murugaiyan --- Keith <keith@...> wrote:
By
murugaiyan mahalingam <murugaiyan_m@...>
·
#9680
·
|
Re: I almost didn't come home today - SAFETY!
And how many more people would kill themselves or others if there were no licensing or regulations? An idea doesn't have to be perfect for it to still be a good idea. Mike <rod.baxter@b...> wrote:
By
MikeK
·
#9679
·
|