Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Re: Can this DRO be used?
|
Mike That is something new to me. I just opened the scale and wiped it all clean. Now I have to wait and see how reliable it is.? Thanks for the idea -Prasad
On Tuesday, March 22, 2022, 08:19:36 PM EDT, mike allen <animal@...> wrote:
??? ??? Have you tried taking the scale apart & cleaning it ? ??? ??? animal On 3/22/2022 4:00 PM, Prasad via
groups.io wrote:
Mike, Thanks and OK
I got the set of three
iGaging scales with EZ-DRO displays a few years ago and they
worked for a while but then one of the scales started
misbehaving. It is the Y scale - the 6 inches long one that
jumps. The display would suddenly jump by an exact 0.2000" for
no apparent reason and then jump again and again. I have tried
at least three "cures" including adding an extra capacitor
inside each display unit to filter out the noise. The jumping
display has reduced but not disappeared. Still happens
randomly. The DRO is not my trusted device currently.?
I wonder if that problem
would still be around with Yurys Toy TouchDRO. If that happens
it would be a waste of my money.?
-Prasad
On Tuesday, March 22, 2022, 06:27:09 PM EDT, mike allen
<animal@...> wrote:
??? ??? then you should go with the Touch DRO . You need to buy the board that works with your scales , the web site should tel you which one you need & then you need a tablet & your good to go . ??? ??? animal On
3/22/2022 1:42 PM, Prasad via groups.io wrote:
I just discovered that the 9-pin D
connectors are meant to accept glass scales.. I
already have the iGaging scales mounted on my
mini-mill and I dont want to start all over again
with glass scales,,
-Prasad
On Tuesday, March 22, 2022, 02:26:24 PM EDT,
Prasad via groups.io <ad_prasad@...>
wrote:
Yeah, I looked at its rear
side view and it has 9 pin D style
connectors which appear to be meant for
the scales. I don't see any USB connector
for connecting standard aluminum scales.
It is obviously meant for some dedicated
scales..?
-Prasad
On Tuesday, March 22, 2022, 10:03:48
AM EDT, Ralph Hulslander <rhulslander@...>
wrote:
That looks like it is
just the display. It does not have
any DRO units!
Ralph
On
Tue, Mar 22, 2022 at 7:09 AM
Prasad via
<ad_prasad=[email protected]>
wrote:
While browsing a link I found this DRO available on Walmart.com. I don't see any scales associated with it.? -- Clausing 8520, Craftsman 12x36 Lathe, 4x12 mini lathe, 14" Delta drill press, 40 watt laser, Consew brushless DC motors and a non working 3D printer |
to navigate to use esc to dismiss