开云体育

According to the EL900 owner's manual, its Virtual Acoustic voices cannot be edited, and after-touch for these is Control Change 16 (XG Assignable Controller 1). Hardware:? As well as those? in my

You are correct that you cannot edit the VL on the EL900, this is only possible on the 900M, ( wish I could get hold of the update Kit ) but they can be edited or should I say created on external

I should have read the 9000pro manual before posting (or was that boasting?) about other PLG hosts. The 900M's EL and XG modes both support control changes 72 and 73 for Release and Attack

You may be interested in this: https://www.beesoftware.com/el-edit

Its interesting that I could possibly use the 9000 to edit the VL voices in the EL900. I know of the El-Edit but expensive for them and I cannot seem to get any replies from John Beesley so far.

Just to clarify, an EL900 VL voice consists of a VA element (which to my knowledge cannot be edited) and Control Changes, RPN's and NRPN's (which can be edited hopefully by the 9000pro's Easy Edit or,

Thanks for you replies and help,? I will try out the 9000pro talking to the EL900 over the weekend and see if it works

I have removed VLSTNDLN.exe from the Files section due to the following licence terms: https://europe.yamaha.com/en/support/updates/52083_en.html

I have now confirmed that all messages and uploaded files are virus-scanned by groups.io, so I have changed the settings of this group to allow members to upload files.

Now members should be able to upload to the Photos section too. Greg Holwell - Group owner

There is a new website for the VL70m editor (VL-Wizard): https://imoxplus.com/site/index.php