¿ªÔÆÌåÓý

  1. YamahaQY70AndQY100
  2. Topics

how do you all send midi program change/bank select messages to your gear from your QY?

 

i'm using a QY700, but i imagine the processes are related. i cannot find this information in the manual, and am having to manually set the patches in the synth for each song.
Anthony Griffiths
 

I have a qy300 and i'm hoping the process will be very similar to the qy700.
1) select the track you want (usually and by default the track number is the same as the midi channel number)
2) press the edit button - on the qy300 this is next to the job button and you'll now see the note and bar information in the screen
3) scroll down to where you want to insert?
4) press the insert button (on the qy300 this is just above the F2 button)
5) select the exact time/bar/tick you want
6) use the down arrow to select 'note' and then press yes/no to scroll to PC
7) use the right arrow button to select the program number you want
8) press the enter key
9) this will now take you back to the edit screen and you should see the program number now present where you inserted it.
10) this program change will now be sent down the midi cable to your?gear every time your song plays and passes this point.

how you program your gear top accept this info is down to you and your gear.

On Fri, May 24, 2024 at 2:10?PM matt via <matthew.r.keable=[email protected]> wrote:
i'm using a QY700, but i imagine the processes are related. i cannot find this information in the manual, and am having to manually set the patches in the synth for each song.

 
Edited

Hi,

Welcome to the group!?


To change the instrument via MIDI, You need to look at the LIST BOOK ?for the QY 70/QY 100.


In order to change the bank/program number via Midi you need send TWO/THREE separate midi calls (page 59)¡­ (upto two for bank: LSB,MSB and one for program number) and unfortunately many controllers can only send one message per physical control. ?This is done via two/three Sysex message using the standard Sysex format.

Link to QY70 Listbook:

(Look on page 59 for bank/program change info).

I hope this helps,

Eric

--

¡°The longest journey starts with the first step." ?- Lao Tzu
 

Hmm... I have QY70 and QY700 and wondering the same thing.
?
How can we send Program Changes in realtime over MIDI out for auditioning sounds?
?
I understand using EDIT to insert Program Change messages. It works, but way too clunky. When cycling through sounds on the Voice Edit page, no Program Change is sent.? Is there any way around this limitation?
?
The Yamaha CBX-K1 MIDI keyboard, for example, will send PC with one of the special shift-key operations.?

1 - 4 of 4