开云体育

Thanks to everyone - I have an 8-pin mini-din 2m male to male straight through cable, cut it and spliced the ends onto a approx. 40m cat5e cable, and it seems to work fine. Cheers, Bill G0VDE.

I bought several on Amazon “8-pin mini-din male to male” in lengths up to 20 feet. They’re cheap. Harley N5BFB Sent: Wednesday, May 7, 2025 2:18 AM To: [email protected] Subject: Re:

But that's no longer than the supplied cable, and if it really works for Apple it won't work for FC40, or if it works for FC40 it doesn't work directly for an Appletalk. It's a plug on both ends so

I used this one at Amazon: https://www.amazon.com/Legrand-RS232-Serial-Cable-Beige/dp/B0002GWN84?ref_=ast_sto_dp Keith - KD8ZSK

I bought an Appletalk extension cable, as that is 1:1 and socket to plug. I think the regular plug to plug Apple talk cables "cross-over" so are no good for the FC40.

Many thanks - that is helpful. Cheers, Bill G0VDE.

Bill, After looking at the FT-857 and FC-40 schematics, I see that the DIN-8 cable is straight-through. Good Luck and 73, Eric / K4PYR [email protected]> wrote:

Hi, recently got an FC40. As you know the connecting 8 way cable is short, and I'm going to make another much longer one. My simple question is - how is the cable wired - is it just straight through

-- This email has been checked for viruses by AVG antivirus software. www.avg.com

does that mean i need to make a new email addy that contains both?? DG9BFC SIGI Am 07.02.2025 um 03:06 schrieb Group Moderator:

On March 2nd 2025, anyone who doesn't have their *FULL NAME* and *CALLSIGN* in the display name field on groups.io will be removed from the group. and IF your message delivery is listed as only "no

Hi Richard, This is the data I have. I’ll look for some more if I can remember. 73 Harley Burton N5BFB Sent: Saturday, February 3, 2024 4:54 AM To: [email protected] Subject: [YaesuTuner] Looking

Thanks Chris, I am aware of the diff between RS232 and TTL, if you have a chance please look in the support section of my website WWW.VE2DX.COM ( /g/YaesuTuner/message/WWW.VE2DX.COM )

The RS-232 connector presents the same information except it's not TTL. TTL stands for transistor-transistor logic and has generally referred to using 5 volt logic levels. Most ham radio

Hey guys, here is some history to help understand my need; in the ft8X7 and ft100 radios Yaesu was offering a mini din 8 pin connector that had 3 functions, CAT TTL, TUNER, LINEAR, through simple

Thanks, that will certainly help. Harley N5BFB 73 Sent: 23 May, 2021 11:06 AM To: [email protected] Subject: Re: [YaesuTuner] Help! My FC-40 has failed The band data signal is the same for the

The band data signal is the same for the FT-450D and FT-991A. I recently built a cable for my yaesu rigs that is working. The band select table is listed at the top-right of the diagram. Note that the

My FC-40 has failed to tune my long wire properly after working flawlessly for the last 4-5 years.? I did some more extensive testing and found this unique result.? It tunes properly on all bands

I use mine with a 66' radiator and about a 30' counterpoise and no ground, hb

My FC-40 needs a longer radiating element than the specs suggest. But I like to work on the 80 meter range. JD Vancouver Is VA7 BTL