开云体育

Hello All after long winter ! Yesterday I put my boat to sea and today goeing to summer cottage with FT897 and FC40.. If you dont know about me, just read some earlier messages from oh6bi in this

Have FC-30 which meets my needs with my mobile FT-857D. The tuner can be used for receive signals. Looking for commnents for the advantages of using this option. TNX Irv N0NOB

Hi Colin, Exactly what I do when operating portable, 300 ohm transmit grade feeder about 15 metres long, feeding a longish doublet (60 metres total I think, I must measure it some day). I hang it in

ratio? Hi Colin, Yes, you can connect the FC-40 to your OCF with twin lead. However, I use 450 ladder line and have read that 300 sometimes is not the best because of the spacing between the leads

well i have got a Ft-40 that came with the bundle of radio's that i got a short while ago, i am wondering weather i could feed a "off center dipole" with some 300 ohm feeder, something like a 33/66Ft

O.K. I have the 5mts long lindy cables. I want to be able to use the tuner from a longer distance. How should I connect the cables? I believe the lindy cables are not 1 to 1, 2 to 2, 3 to 3, etc. Can

This is KE7GGV...Albany Oregon..I am getting a YAESU FT-707 and looking at the FC-707 Antenna Tuner....does anyone own one out there...I need any information,tips,ideas,quirks...any info will

Hello Jurgen, Tnx fer taking the time to reply. I've decided to replace the CAT-5 cable I now use with 8 conductor rotor wire. I cut the cable that Yaesu gave me and will splice the wire in between.

I made several control cables for me and my friends using CAT-5 cable, 20m long, all work fine. The shields were connected to the metal parts of the mini-DIN connectors. 73, Jurgen, DJ5HD

Hi Everyone, I'm new to this group, but not with couplers like the AH-4. I'm replacing my Icom AH-4 with the FC-40 since I've upgraded to the Yaesu FT-950. I've looked through the previous posts, but

Hi all, my 8pin din pigtail on my FC-40 has become corroded, and I am dithering between trying to replace it with a homebrew pigtail; running the control cable from the radio straight to the connector

Hi Folks... I have an FT-857 with a FT-40 antenna tuner... My home is located below the surrounding area and my property is heavily wooded... I installed a random wire antenna about 375 feet long

Hi All ! Last weekend I tried again OFC dipole. It didnt work as well as I was thinking, Maybe I have to change position of the antenna itself but here in Finland cold season is starting (on Sat

Hi Sami, yes the mic works still in CAT mode, you just lose FST and UP / DOWN controls, but PTT is still good! cheers Clive - original message - Subject: [YaesuTuner] OFC Dipole and FC40 + CAT From:

Hi All ! In my last message I told to start new tests with OFC Dipole and FC40. Last weeks not enough time to testing but yesterday I made first test. Antenna was same as in VK2DQ writings, longer leg

Had custom cable made to 125ft lenth and it works fine! of cable. can With ground vertical Gnd.

Good information-- Thanks Rami! jp, w1jp <snip/>

My 23m wire test is done, it took 6 weekends at cottage. ( HI, I didnt do that all the time..) I started with abt 40m length wire then abt 20m then abt 11m and 15m. Finally 23m which I found best for

Hi all, I added photos of my setup in Mauritius, 3B8 from February 2006. The antenna was a "Spiderbeam"-fiberglass pole, 12m tall, fixed at an old construction. The radial system consisted of about 8

Hi All ! It was my fault, there was one bad connection. I did new tests to day, here are the results: 1842 kHz OK 1873 kHZ OK 3520 kHZ +++++ 3785 kHz +++++ 7003 kHz OK 7098 kHz ++ 10116 kHz ++ 14030