开云体育

Let's try to get this group back on track!

Hey all— Has anyone built and external controller for the FC-40? If not, what about the protocol that the controller uses? Thanks, Jon w1jp

I have a full 108" whip and the lowest band I can get is 30m. I have heard of other people leveraging a capacitance hat and getting down to 80m. $0.02, Jon w1jp

I have no fc 40 BUT an fc1000 by yaesu,,,, I had some spare room in it and put a 1:4 balun on the output side .. Now with a jumper wire I can switch that balun in and can tune dipoles, loops or other

Hi Ken. I tried to contact moderators and owner but no success. Not contacted to Yahoo. There is new group: Yaesu-Autotuners. It is controlled by the owner F5PSR, Cedrick. All messages has to be

In spite of owning an FC-40 I don't hang out here much. Just dropped in today to find a lot of spam and this thread which is certainly justified. I guess the list owner has gone missing? If he/she

Hello everybody, I just started on the new group. So I have got a lot of things to do improve it is just the begining and I'm interested in any kind of ideas. The link to reach the group home page is:

I am a newby to ham radio, still studying to take the exams and have been following this forum as I have a yaesu radio which has been opened up for marine band so that I can eventually install it on

I second this motion. All in favor say "I".

Good morning Cedric, I too would like to see the group continue even though I am not an owner of one of these Yaesu tuners. It is always interesting to read what others are doing and see if maybe

Hi Cedric, I also have a FC-40 and ATAS-100 along with a FC-30. Are we looking to make a new group to keep the spammers out? May be Yaesu-Autotuners and have key words that would include all the

Thanks rami for your post, ? Of course the group would be in English ! Not in french... ? 73 - Cedric f5psr --- En date de?: Mer 7.4.10, raimo <oh6bi@...> a écrit?: De: raimo

Hi Cedric. Only Problem I can see is the language. .. Somehow I can write and read English but French not at all. My position will be just as a member, I am using already too much time in the web. 73s

Hello everybody, I'm Cedric, my call is F5PSR, I'm a FC-40 and ATAS-100 owner. I don't write here but as I spend a lot of my time on the Web (I'm moderator on others french groups) I propose to create

Hello FC-40 users. ( I dont mean these spammers !!) I tried to sen kindly notes to owner but his email address doesnt exsist anymore. If looking member list there can be found two moderators. Only one

Is their a moderator for this group? PLEASE BLOCK THE SPAMERS!!!

It looks like you have it covered except... What are you using for a mount? Isolation from ground here is critical. Take a look at my posted pictures; I use a Breedlove HF Insulator. Well worth the

Years ago i had a fc1000 in my car (rf wise almost like the fc40) Problem in almost al setups is rf isolation on the lower bands …. A short whip becomes more and more impedance on the feedingpoint

Is anyone else using the fc40 mobile to drive a whip? I have my FC40 mounted onto the spare tire bracket of my RAv4. It is connected to a 1/4 CB whip (only 2-3 inches of wire between.) The ground on

Hi All. I sent messages to this list owner. Looks like Owners mail address is not anymore working. So I checked moderators and sent below copied message to them: ---------------------------------