开云体育

Converted from Rich Text hi Jurgen., i'm intrigued to hear more of your experiences with the 897 and to compare with 857D.... I guess you have a key advantage with that built-in power supply., does it

Jürgen, Very interesting... I also look forward to test my setup with the FC40, the Spieth pole and one of the radios FT 857 or / and 897. During summer vacation. Do you have extension cable for the

Dear all, I am just back from a vacation to 3B8, Mauritius and want to share my experience with the FC-40: I had a small bungaloo with space for an antenna and checked this in advance with the hotel.

http://ph.groups.yahoo.com/group/YaesuTuner/photos/browse/3625 photos posted. Will add better ones as soon as I can showing more detail, these are done in a 5mins break!

Hi Kyle, sorry long delay - work issues in the office - Basically, connect a balanced feedline (openwire, ladderline) but NOT coax to the ATU. One side to the wire connector, the other to ground. I

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the YaesuTuner group. File : /hamadf.exe Uploaded by : ab9lx <ab9lx@...>

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the YaesuTuner group. File : /mh-59a8j.pdf Uploaded by : kc9anq <kc9anq@...>

The FC-40 is a wire tuner. what are you doing with the other side of the 300 ohm line? Clive <l81ker@...> wrote: Hi folks, after moving to FINLAND where its very cold now, I put up a longwire

Check out the excel spread sheet for the AH-4 long wire antenna lengths in the file section of the group point, the

Aha, so basically I hit smack in the midst of the next "bad" point, 277ft (84.4m) to 283ft (86.25m) - my landlord is advertising for rent the place adjoining mine, and he's already given the ok for

Hi folks, after moving to FINLAND where its very cold now, I put up a longwire loop of approx 84 metres of wire. Its fed with 300-ohms radioshack line. The tuner WON'T tune this on the lower bands

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the YaesuTuner group. File : /AH-4 Graphical Wire Length Calculator 2.2.xls Uploaded by :

WOW ! That's great..... Bob Lancon <N5DMT@...> wrote: Kyle, The 5 turns did the trick and it is tuning great now, thanks for your help! N5DMT Bob the base of the antenna. the antenna. night and

Kyle, The 5 turns did the trick and it is tuning great now, thanks for your help! N5DMT Bob the base of the antenna. the antenna. night and noticed that it does tune from 7.050 to 7.200 but any higher

Bob, You could try two things: 1. Put about five turns of coax about 5 inches in diameter at the base of the antenna. 2. Put a few turns ( 10 X 1" ) of #14 gage wire at the base of the antenna. I'm

Kyle, thanks for the response. I did play with it a little last night and noticed that it does tune from 7.050 to 7.200 but any higher will produce high SWR.... I will try adding the Ground to the

The Ham Stick has inductance. Add a few turns of coil at the base of the antenna. OR improve the bumper to chassis ground. or Both. Make sure the tuner is close to the base of the antenna. Bob Lancon

Just installed the Ft-857D, FC-40, Hustler bumper strap mount and 102" SS Whip in my truck. It works on all bands but 40 meters (high SWR) I have tried extra lenght of coax added to the supplied coax.

If you can get the tuner grounded to a metal water pipe or try the AC ground. My tuner is grounded with a 2 foot length of wire to one ground rod and then to the AC ground rod a few feet from the