¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

FT-847 only transmitting on FM mode. de: W1SMS


 

Will do

Get
On 10 Oct 2023, at 21:14, Steven Simons <ssimons@...> wrote:

Andrew,
Nice to meet you and thanks for the repair tips.
I do have a copy of the service manual - which I plan on reviewing prior to performing any adjustments.
I'll probe the test points you refer to and see what I find.
"stay tuned"....
de: W1SMS


 

You can download load the manuals on this forum, have a poke about

73

Andrew

G8UUG

Get
On 10 Oct 2023, at 21:14, Steven Simons <ssimons@...> wrote:

Andrew,
Nice to meet you and thanks for the repair tips.
I do have a copy of the service manual - which I plan on reviewing prior to performing any adjustments.
I'll probe the test points you refer to and see what I find.
"stay tuned"....
de: W1SMS


 

Andrew,
Nice to meet you and thanks for the repair tips.
I do have a copy of the service manual - which I plan on reviewing prior to performing any adjustments.
I'll probe the test points you refer to and see what I find.
"stay tuned"....
de: W1SMS


 

¿ªÔÆÌåÓý

Check TP1003

?

?

If this is out of lock you will only get FM!

?

73

?

Andrew

?

?

From: [email protected] [mailto:[email protected]] On Behalf Of Steven Simons
Sent: 10 October 2023 18:18
To: [email protected]
Subject: [YaesuFT847] FT-847 only transmitting on FM mode. de: W1SMS

?

To the group;
My trusty FT-847 has stopped transmitting on all bands (HF>UHF) on SSB, CW and AM modes. It does work OK on the FM mode - TX audio via mic is OK.
I did try swapping the TX & RX filter modules with no change.
I also reset the uP using menu #39 without any success.
Any suggestions on where to start troubleshooting?
Thanks and 73,
Steve W1SMS?


 

Hi one of your LO's our out of range, check all the TP, there is one that duold be 4 V you may find it is .2.

Work through the set up procedure on the AF board.

73

Andrew

Get
On 10 Oct 2023, at 18:18, Steven Simons <ssimons@...> wrote:

To the group;
My trusty FT-847 has stopped transmitting on all bands (HF>UHF) on SSB, CW and AM modes. It does work OK on the FM mode - TX audio via mic is OK.
I did try swapping the TX & RX filter modules with no change.
I also reset the uP using menu #39 without any success.
Any suggestions on where to start troubleshooting?
Thanks and 73,
Steve W1SMS?


 

To the group;
My trusty FT-847 has stopped transmitting on all bands (HF>UHF) on SSB, CW and AM modes. It does work OK on the FM mode - TX audio via mic is OK.
I did try swapping the TX & RX filter modules with no change.
I also reset the uP using menu #39 without any success.
Any suggestions on where to start troubleshooting?
Thanks and 73,
Steve W1SMS?