开云体育

Does it have the same symptoms without all the FT8 stuff connected? Does it cut out on FM?

Also, I have had this radio cut out on me, when the 3v backup battery is failing or failed. And the only way I could make it work was by doing a full reset each time, and then everything works as it

Hello Phil, you have perhaps enter HF to your 847, put the ferrit rods and some tours of cables on all enter cables, I use it from beginning and no problem. 73 -- Yvan

What size psu are you using?

If you are using or sharing the same connection to the computer and the external tuner this could happen. You can buy a device which helps to share the data using that socket for the tuner. Sent from

Hello Group - Trying to troubleshoot a Transmit Problem - trying to set-up for FT8 HF. As I adjust RF Power and MIC Gain while transmitting FT8 the -847 cuts out and Display flashes and I loose CAT

Thanks for your help, but if it were the potentiometer, why does everything work fine on SSB? There must be something defective or adjusted in the area Sqelch or AGC, or? 73, Tom Am 21.12.2022 um

As a last ditch resort before replacing the pot, I have dismantled them before and given them a clean. Generally the wiper either gets corrosion on it or it's just general dirt buildup (use switch

I had that problem, try cleaning the track in the pot, dribble some cleaner (alcohol say) down the shaft with the set on it's back with the knob off, if that does not work it's a replacement pot

Hi FT-847 users, I have the problem with my FT-847 that with FM the squelch closes a little, but when turning the knob further to the right, the squelch opens again. If the squelch knob were a clock

Very useful Thanks BR Andrew Get Outlook for Android

CatRadio 1.3.0 is now available for download https://www.pianetaradio.it/blog/catradio/ Main changes: * Radio info * Dark theme * MIC levels * NB2 * Meter COMP, ID, VDD * Yaesu band stack * Hamlib 4.5

I am having the same problem now that GREENCUBE is on my RADAR.? Tonight I figured out that I can operate regular, non SAT mode, and go SPLIT.? ?The PstRotator controls the receive doppler and I

Hello Spence and Dave, Yes it's the plastic decal for the Sat control. Regards Stuart Vk5ade

I think it’s the stick on plastic decal about the Sat controls.? De Spence M0STO Sent while portable! please excuse typos.

Hi, Stuart, Im not sure what you are seeking recently. I acquired an FT-847 and it came with copies of the Operating Manual and Technical Manual. Could you please explain what I should look for? BTW,

Hello Group, I am new to this group. I am trying to track down a FT847 RA0070300 SHEET this is the Satelite label. I moved QTH some time ago and it came of in transit. It is only a cosmetic issue but

To add to that, do not attempt to work the satellites until you can hear your own voice coming down from the satellite. Bill K2WH Sent: Sunday, November 20, 2022 8:00 AM To: [email protected]

I used to use an ft847 and the sat mode is a special mode designed to be used only when doing qso’s via satellite. The mode provides automatic frequency tracking to track the satellites as they

You'd have to run in split mode if you want tx/rx on the same band.