开云体育

I kept the frequency on for an hour -- and about 6:30 p.m. I heard 2 voices (male and female) -- loud and clear for about 5 seconds when I was in a room away from my radio! Carol B Flaherty KA7ROL

Stacy and Eric, We will make ONE 4-position Antenna Switch. We will bring 2 soldering irons. We will bring 2 small stand up magnifiers. If you have a suggestion for additional tools, please suggest!

Stacy, Count me in for a kit for the 4 position Antenna Switch. I will be out of town on the 22nd but we can coordinate as to when I can pick the kit up. Thanks! Dan Douthit KK7OTC

Wayd, I have enough supplies for 2 Tape Measure Antennas.? I will put one kit to the side for you.? The cost for the Tape Measure Antenna is $20 for the parts. We will see you March 22nd at Solder

I will be there to build antenna switch. I will bring my solder tools! [email protected]> wrote:

Location: 185 W Cameron Bridge Rd., Bozeman, MT 59718? Big Brown Shop

I would like to build an offset attenuator. If you have a parts kit left for a tape measure antenna I would take one of those also. Wayd WA7YD [email protected]> wrote:

Hello All, On Saturday March 22, 2025 GHRC will be having a Solder Saturday event from 1-3pm.? The event will kick off with a brief tutorial/refresher on how to solder.? We have come up with 2

Hi never saw a yea or nay so did not bring it with me today. Will just ignore unless i hear something back. David

John Yes, have a 1kw "cantena" you may use.. I work part time at the 4C NAPA and you could pick it up there Friday? 9 to 12? ,,,,1 to 6? or Sat 8 to 5 or Sun 10 to 5. No rush to return it. David

Does anyone have a dummy load that I could borrow that is greater than 500 watts? I need to do some calibration with my new amplifier and the manual states to do the test connected to a dummy load.

Update tonight, 3/10/2025, on the W7YB ARC Station in Cobleigh Hall Room 633! Wednesday afternoons, 1:00-4:00 p.m., during Spring Semester 2025 when the campus is open, the station is open for hams

*Reminder: 88 repeater net* *When:* Tuesday, March 11, 2025 8:00pm to 9:00pm (UTC-06:00) America/Denver *Where:* 146.88- 100Hz View Event ( /g/W7ED/viewevent?eventid=2598071 )

Hello All, I have updated the sign-up genius for Net Control of the 146.88 W7ED Bridger Repeater Net.? We are needing a Net Control for the 2nd Tuesday and also the 3rd and 5th Tuesday of the

Hello All, Since many of us have a 6 meter antenna now, let's do a net!? Thursday @ 7pm on or around the frequency 50.125.? It should be fun learning a bit about the magic band-6 Meter.? Hope to

Hi Ronnie, Since the last meeting was cut short for presentation time. This month I was planning on talking about the Montana law that changed in regard to HOAs and antennas and also give you the

GE (good evening) to All Please find the zoom meeting link below for the upcoming GHRC meeting this Thursday, March 6 at 1900 MST at the SAR Building in Bozeman. Hopefully we can see you there but if

*Reminder: 88 repeater net* *When:* Tuesday, March 4, 2025 8:00pm to 9:00pm (UTC-07:00) America/Denver *Where:* 146.88- 100Hz View Event ( /g/W7ED/viewevent?eventid=2598068 )

*Reminder: Club Meeting* *When:* Thursday, March 6, 2025 7:00pm to 8:00pm (UTC-07:00) America/Denver *Where:* SAR Building View Event ( /g/W7ED/viewevent?eventid=2598069 )

Still a work in progress. Got your wood. Have a couple boards each of fir, poplar, oak. About 3-6 inches wide and couple feet long. Will bring Sat morning. [email protected]> wrote: