Yearly Due Information:
-GHRC Dues; $10
for student, $20 for single member, $25 for family. Please give check or cash
to?Eric Anderson AC7V GHRC Treasurer, there is no PayPal
account at this time, mail is best; GHRC,
PO Box 4381, Bozeman, MT, 59772
- ERA Dues; Suggested
annual $30, can be paid online with PayPal ) Please hold of on ERA contributions?until we know if the grant from Oracle has been approved. If so they will match contributions)
-MRLA Dues; Donation based: suggested annual due of $50. Paid to Harley
Leach KI7XF
Hope this helps, Thanks
Falicia Anderson KF7TAH
On Monday, February 1, 2021, 08:31:45 AM MST, Norm kd7tqm via groups.io <kd7tqm@...> wrote:
I forgot to put the date for the meeting Feb 4 7pm 146.880 repeater?
|
ERA - Eaglehead Repeater Association ???????? POB 4381 ???????? Bozeman, MT? 59772-4381 Dues to ERA are tax deductible.
Please hold off contributing to ERA, until a matching agreement has been setup.
???????? Pay Pal for ERA: ????????
MRLA - Montana Repeater Link Association ?????????? c/o Harley Leach ?????????? 4620 Conestoga Circlle ?????????? Bozeman, MT 59715 Dues to MRLA are tax deductible.
GHRC- Gallatin Ham Radio Club ?????????? POB 4381 ?????????? Bozeman, MT 59772-4381
73, Harley
|
Whoops, mine was sent a couple of weeks ago.? WA7MKN
?
Sent from for Windows 10
?
toggle quoted message
Show quoted text
From: Neil kl7jgs
Sent: Monday, February 1, 2021 12:20 PM
To: w7ed
Subject: [W7ED] ERA donations
?
Hello All,
It's the beginning of the year and time to ask for donations to the
Association for the site rent and repeater maintenance costs.
I'm working on a matching grant from Orcale. If this grant is approved
then we may qualify for a dollar for dollar match.
I'll keep everyone informed as this progresses. Please hold off donating
until I know more.
Neil Ramhorst
KL7JGS Treasurer
?
|
Hello All,
It's the beginning of the year and time to ask for donations to the Association for the site rent and repeater maintenance costs.
I'm working on a matching grant from Orcale. If this grant is approved then we may qualify for a dollar for dollar match.
I'll keep everyone informed as this progresses. Please hold off donating until I know more.
Neil Ramhorst
KL7JGS Treasurer
|
|
|
I forgot to put the date for the meeting Feb 4 7pm 146.880 repeater?
|
Ham club meeting 7PM on the 146.880 repeater?
|
Reminder: 88 repeater net
When:
Tuesday, 26 January 2021, 8:00pm to 9:00pm,
(GMT-07:00) America/Denver
Where:146.88- 100Hz
View Event
Description: Tuesday night repeater net
|
Reminder: 88 repeater net
When:
Tuesday, 19 January 2021, 8:00pm to 9:00pm,
(GMT-07:00) America/Denver
Where:146.88- 100Hz
View Event
Description: Tuesday night repeater net
|
Plus offset 88 rptr fixed
The plus offset input, for the 146.88- repeater, has been deaf as of late. Installed a new receiving? antenna, thanks Skeet!, Monday about noon time. It hears much better now.
As some of you know, much of Bozeman lies in the shadow of the Bridger 146.88- repeater.
To help getting into the Bridger repeater from Bozeman, a plus offset input to it was placed on the roof of Cobleigh Hall some years ago.
To use it, just program in a 146.88+ 100Hz channel into your radios. Remember to switch back to the -offset when outside of Bozeman.
If you have had trouble getting into 88- from town, give the 88+ a try.
Harley
|
Re: Have the aluminum sheets
toggle quoted message
Show quoted text
Don, kc7ewz, delivered 15 pieces to me this afternoon, Thanks Don!
So, we are all set, for the time being.
On Wednesday, January 13, 2021, 7:39:18 PM MST, Bob k7rnd < bob@...> wrote:
I will have it ready tomorrow afternoon.?
K7RND
Has to be somewhat rigid, spans a 3.5 x 6 hole.
On Wednesday, January 13, 2021, 12:13:56 PM MST, Bruce ke7sjz via <ke7sjz= [email protected]> wrote:
How about shim stock? On Wed, Jan 13, 2021 at 12:08, Bruce Walker Does it have to be aluminum? I might be able to get that in steel from work as a donation. On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Don, kc7ewz, delivered 15 pieces to me this afternoon, Thanks Don!
So, we are all set, for the time being.
On Wednesday, January 13, 2021, 7:39:18 PM MST, Bob k7rnd <bob@...> wrote:
I will have it ready tomorrow afternoon.?
K7RND
Has to be somewhat rigid, spans a 3.5 x 6 hole.
On Wednesday, January 13, 2021, 12:13:56 PM MST, Bruce ke7sjz via <ke7sjz= [email protected]> wrote:
How about shim stock? On Wed, Jan 13, 2021 at 12:08, Bruce Walker Does it have to be aluminum? I might be able to get that in steel from work as a donation. On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
I will have it ready tomorrow afternoon.?
K7RND
Has to be somewhat rigid, spans a 3.5 x 6 hole.
On Wednesday, January 13, 2021, 12:13:56 PM MST, Bruce ke7sjz via <ke7sjz= [email protected]> wrote:
How about shim stock? On Wed, Jan 13, 2021 at 12:08, Bruce Walker Does it have to be aluminum? I might be able to get that in steel from work as a donation. On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
Has to be somewhat rigid, spans a 3.5 x 6 hole.
On Wednesday, January 13, 2021, 12:13:56 PM MST, Bruce ke7sjz via groups.io <ke7sjz@...> wrote:
On Wed, Jan 13, 2021 at 12:08, Bruce Walker <ke7sjz@...> wrote: Does it have to be aluminum? I might be able to get that in steel from work as a donation. On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via groups.io <ki7xf@...> wrote: There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
Steel doesn't work as well with the magnets. I have some steel covers, but don't like them as well as the aluminum ones.
On Wednesday, January 13, 2021, 12:13:28 PM MST, Bruce ke7sjz via groups.io <ke7sjz@...> wrote:
Does it have to be aluminum? I might be able to get that in steel from work as a donation.
On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via groups.io <ki7xf@...> wrote: There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
i would check with soars manufacturing out dry creek for scrap pieces.? as much aluminum as they use, i,ll bet they might have scrap pieces that small.? but the also might just recycle it. ewz
There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
toggle quoted message
Show quoted text
On Wed, Jan 13, 2021 at 12:08, Bruce Walker <ke7sjz@...> wrote: Does it have to be aluminum? I might be able to get that in steel from work as a donation. On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via groups.io <ki7xf@...> wrote: There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Re: looking for sheet aluminum
Does it have to be aluminum? I might be able to get that in steel from work as a donation.
On Wed, Jan 13, 2021 at 10:25, Harley ki7xf via groups.io <ki7xf@...> wrote: There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
looking for sheet aluminum
There is an RLC-4 controller at each repeater site that needs a cover plate. .040 thick aluminum works just great, 4.4" x 7" is the perfect size. Can cut over sized pieces to fit.
The RLC-4 comes with an enclosure, but have modified it to make adjustments easier. Therefore, the need for a cover. I use neodymium magnets to hold the cover in place on the steel enclosure. No screws, just slide the cover away, make adjustments, and slide back into place.
Need about 10 pieces, a couple would get me by, the rest can wait until later. ERA needs 4 MRLA needs 3
Any ideas of where there might be some for the asking? Have checked Pacific every now and then, no luck so far.
Thanks, Harley
|
Reminder: 88 repeater net
When:
Tuesday, 12 January 2021, 8:00pm to 9:00pm,
(GMT-07:00) America/Denver
Where:146.88- 100Hz
View Event
Description: Tuesday night repeater net
|
Harley ki7xf