?

The only think that has changed on this list is the RF board… and
that change was just to remove the divider circuit for the
low-frequency operation that can now be done in software. The
previous board can be used by just not building out the divider
circuits. They are otherwise identical and no need to rush out and
get the new boards.
DR. WILLIAM J. SCHMIDT - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ VP2EHZ
Owner - Operator
Big Signal Ranch – K9ZC
Staunton, Illinois
Owner – Operator
Villa Grand Piton – J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com [1]
Moderator: North American QRO Group at Groups.IO.
Moderator: Amateur Radio Builders Group at Groups.IO.
email: bill@...
FROM: [email protected] <[email protected]>
ON BEHALF OF John Owens K1JO via groups.io
SENT: Saturday, April 5, 2025 8:10 AM
TO: [email protected]
SUBJECT: Re: [AmateurRadioBuilders] Back in the Saddle
Thanks Bill, I appreciate any advice.
I'm just wondering about getting the updated RF boards and any other
new boards or kits that you have. Currently, I have 4 sets of the
following:
LPF Filter 100W 11 Band 2024-02-03
LPF Control 100W 11 Band 2024-02-14
2 - BPF 2024-04-20 V012.6
2- RF 2024-04-08 V12.06
Front Panel K9HZ (After G0ORX0) V012.6 11/15/23
Switch Matrix K9HZ (After G0ORX0) V012.5 09/27/23
2nd Receiver Adapter X12.6 04/14/24
Teensy HAT Adapter V12.6 11/22/23
4 - Encoder Boards 3428224 AP11
TR Switch Carrier 2024/01/14
Tiny 85V with socket
20W PA Kit V2.01
Links:
------
[1]
[2] /g/AmateurRadioBuilders/message/6290
[3] /mt/112074832/243852
[4] /g/AmateurRadioBuilders/post
[5] /g/AmateurRadioBuilders/editsub/243852
[6]
/g/AmateurRadioBuilders/leave/11522011/243852/920863695/xyzzy

The only think that has changed on this list is the RF board… and that
change was just to remove the divider circuit for the low-frequency
operation that can now be done in software. The previous board can be
used by just not building out the divider circuits. They are
otherwise identical and no need to rush out and get the new boards.

DR. WILLIAM J. SCHMIDT - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ VP2EHZ

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

Owner – Operator

Villa Grand Piton – J68HZ

Soufriere, St. Lucia W.I.

Rent it: www.VillaGrandPiton.com [1]

Moderator: North American QRO Group at Groups.IO.

Moderator: Amateur Radio Builders Group at Groups.IO.

email: bill@...

FROM: [email protected] <[email protected]>
ON BEHALF OF John Owens K1JO via groups.io
SENT: Saturday, April 5, 2025 8:10 AM
TO: [email protected]
SUBJECT: Re: [AmateurRadioBuilders] Back in the Saddle

Thanks Bill, I appreciate any advice.
I'm just wondering about getting the updated RF boards and any other
new boards or kits that you have. Currently, I have 4 sets of the
following:
LPF Filter 100W 11 Band 2024-02-03
LPF Control 100W 11 Band 2024-02-14

2 - BPF 2024-04-20 V012.6
2- RF 2024-04-08 V12.06
Front Panel K9HZ (After G0ORX0) V012.6 11/15/23 Switch Matrix K9HZ
(After G0ORX0) V012.5 09/27/23 2nd Receiver Adapter X12.6 04/14/24
Teensy HAT Adapter V12.6 11/22/23

4 - Encoder Boards 3428224 AP11
TR Switch Carrier 2024/01/14
Tiny 85V with socket
20W PA Kit V2.01



Links:
------
[1]
[2] /g/AmateurRadioBuilders/message/6290
[3] /mt/112074832/243852
[4] /g/AmateurRadioBuilders/post
[5] /g/AmateurRadioBuilders/editsub/243852
[6]
/g/AmateurRadioBuilders/leave/11522011/243852/9208636
95/xyzzy