开云体育

Mike: I suggest that you look at the very fine software modification for Rx offset from K2ROW in this group's Files section. The original software did not allow for a very effective offset on

Yes. I did mean collector of Q6. I hate when typos sneak in. 72, Marc N4DR

I would be interested in looking at your keyer software mod. Dave Fine, W0DF

I've never actually sat down and calculated the power consumed by the 49er in transmit mode, but I would think that supply would work fine. If anyone has the actual current draw, I think all of us

I picked up a small wall mount supply 12VDC 860ma, is this sufficient to drive the 49er and the VFO circuits. I am pretty sure I will be fine on the 49er, but don't know what the VFO boards will draw.

Hi, I wonder if anybody out there can help, I'm pulling my hair out here and I've not much left! I've built the DDS VFO which appeared to work fine with a nice stable output on J3 when I looked on the

Hi Karl, I'm not sure if merging two pieces of open source software together merits publishing in QST! But if there is interest, I can upload the code to the Files section. Needs a little cleanup

Slim; I just made a metal enclosure for mine?by using the metal from a old desk top computer power supply housing.? The ends and top will be made from clear plastic, showing off my handy work, hi

I have a Pi, but haven't done anything with it. You've probably seen this: Interfacing Arduino with Raspberry Pi | | | | | | | | | | | Interfacing Arduino with Raspberry Pi Interfacing Raspberry Pi

Hi Jack, I have purchased your book and Glen's book, and both are excellent resources. Problem is, there just isn't enough time to build all the cool projects! I do like to study the code, though. One

This looks promising and the shipping might be reasonable. Electronic Plastic Shell Cartridge Handle Project Case Desk Instrument 200x175x70mm | | | | $ 7.99 | | | | | | | Electronic Plastic Shell

I've been trying to find a suitable case here in the UK. I can ship from the Container Store store in the US but I'd be absolutely crazy to do it. The case would cost me $10.34 (purely because i'm in

Chuck; I think that you should write up this keyer mod and submit it to ARRL for possible publication in QST! This 49er/VFO, I would guess, has been a popular build project, and guys like me, would

Thanks a lot, Mark. After work I will scope Q6 and probably swap for a 2N3904 running with 12V tops. I will let you know results. Bob

I think you meant the collector of Q6, not "D6" Marc(?)... Cheers, Jim, ab1br

I have quite successfully used these encoders from China and by carefully dismantling have been able to remove a tiny ball bearing to end up with a smoothly turning frequency controller for my SDR (no

Hi Chuck: No need to "hide" Glen's work. Indeed, I met him two years ago at the Four Days in May conference that takes place each year in Dayton just before the hamfest. He's an interesting guy. BTW,

After I built this fun project, I thought it would be interesting to add a software keyer. I looked around, and found some simple iambic keyer code in that other Arduino for Ham Radio book (published

Bob: I also had the same problem with both of my 49ers. The first one was a blown driver transistor, Q6. It would work for a few minutes and then..... no output. I placed my finger on the transistor

This was also on the site and looked closer to the size I want: