开云体育

Somethings changed with a recent Ubuntu update.? I tried launching the Arduino AppImage and got this: ./arduino-ide_2.3.6_Linux_64bit.AppImage

Thanks Terrance. I’m interested in using FT8. dave, n3ds

Yes, the book corresponds to the V66.9 firmware, so you should update the firmware on your radio. You can find the firmware and the instructions here: https://github.com/KI3P/SDTVer066-9/tree/main

This is excellent. Thanks, Al! - Jerry, KF6VB

Yes, the code is available on my GitHub.? It's ( https://github.com/tmr4/T41_SDR ) for v11 though.? I'm slowly modifying it for the v12 hardware changes.? Note that this can't be dropped into the

My software ( GitHub ( https://github.com/tmr4/T41_SDR ) ) is for v11.? I did send Al a little blurb about my build.? I'm currently building the v12 and slowly modifying my software for the hardware

Hi Everyone, I have created, with Jack's help, a new site all about the T41-EP at: https://t41sdrtransceiver.wordpress.com This is an 'information and background site" for the T41, not an open forum -

OK, Will do. Al

Very nice! Have you made the code available to the group? Jack, W8TEE

Hi everyone. We have a radio club where I work.? Last year we purchased a T41 kit from AI6YM.? I understand it have v50.2 firmware on it.? When trying to follow the Receive IQ calibration, from the

Bill and Al Thanks very much for the replies. I'll get it from amazon.co.uk, though I see they're still listing the old edition as well as the new one. Luckily I was signed up to this group when all

I've noticed that my radio sets its time automatically after a few minutes if I have the USB cable plugged in. I have not yet found the code that makes this happen, but I'll get there eventually.

Oliver, morning. Yes, that has fixed the audio pumping. Thanks. Roger G8JWT

It can but it takes up a lot of memory.? Here's mine decoding.

Could the FT8 mode also be integrated into the T41? It would also be nice if there was a way to set the time. Best regards, Wolfgang

Yes, that was my mistake. I removed the shutdown routine. The pumping is gone. // Uncomment the line below if your mainboard is populated with / // the ATTiny shutdown routine activation hardware

NA that was "cheapest rate" ship. I cannot for the life of me why shipping went thru the roof recently. There is no reason for it unless the carriers just don't want the harder business/ want to stick

Well, I think 3 seconds is ok... keeps you from pressing the button twice accidently and having the radio come right back on... You could probably cut it to 1 second though... Dr. William J. Schmidt -

Correct... but NOT if the ATTINY is missing but the config thinks it is!!! Dr. William J. Schmidt - K9HZ J62K(J68HZ) 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch –

If you will eventually use the 100W PA… yes you want 200V caps! Here is a simpleton approach (there is way more to this, but just for reason): P=IE, E=IR, so P=E^2/R … so E = SQRT (P * R)… if