开云体育

What was the charge for shipping by DHL (ballpark)? Jack, W8TEE

I was glad my hip held out and I could come by. Wish I could have spent more time chatting. Tim

Just ordered some PCBs from JLCPCB. Looks like price for 5 boards is back to $2, but there was a $3.63 charge for customs and duties added. DHL shipping cost seems to have also increased by about 50%.

And Hamvention is OVER! We had a great time… in-doors this year. Sold 50 fill T41 board sets, ten 20W PAs, ten of the latest T41 books (signed/personalized editions), and many other kits. Suitcase

Hi John, I use a two-channel Siglent SDG 2122x generator that can synchronize the channels and phase shift one by 90 deg - hence quadrature signals. The Spectrum analyze is not entirely necessary and

Hey everyone! Tim, W4YN donated some very nice 3 wire pre-made cables, twisted, to be used to connect the teensy audio hat to the main board (the 90 degree pins). I will include these free of

You know me. “K9HZ Boards and Kits”. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator

Cool Mark! Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton - J68HZ

Correct. That was due to an update. Oliver has unlocked the method of locating the old files for you… the “Old files” directory in each of the BOM, schematic, gerber, etc directories. Dr.

I've not tried testing this particular configuration, so I'm speculating here. If you don't have any receive circuitry populated then the only signal present to be digitized is the self-induced noise

The yellow LED next to the reset button on the Teensy board lights up brightly and dimly. And the audio is pumping most strongly on bands 17 and 15 at the same time. What's the problem? Only the

Yes. Great news Mark. Congratulations. It is an awesome milestone dave, n3ds

John - A signal generator has many uses.? I use one often.? But if you're goal is just finishing the T41, I would focus on the calibration directions (

I think that's right, see an earlier version of the schematic here:

I have the latest RF board from Bill and when adding the components, I noticed that C3, C14, C83, and C84 which are in the BOM do not have pads on the board...unless I missed something. Was this a

On Sun, May 18, 2025 at 04:50 PM, Terrance Robertson, KN6ZDE wrote: Thanks Terrance. When you say (see below) that the two-tone signals are created internally now with the V66-9 cal routine, does that

That's wonderful to hear, Mark! May it bring you many contacts and much joy.

Awesome!!

You can import signal files into Digilent instruments as well.? You can also create custom functions directly in the tool.? Here's my first attempt at creating quadrature two-tone signals. I still

Well, after a long, arduous (my opinion!) but enjoyable journey, I finally got on the air.? 10 watts, EPA into Southern Louisiana using a home brew 20M vertical dipole, thru 50' of coax.? RST of 52