开云体育

Whose code is this? Jack, W8TEE

Well, it was worse than I remembered, and worse than when keithsdr was worked out. Here's a snippet for Teensyduino-1.59 usb_desc.h hosted insice arduino-ide-2.3.4. It replaces the body of the clause

I was dealing with the same problem. With only the Main board installed I was getting a lot of noise out of the speaker and on the spectrum display. Re-seating the PCM1808 and the PCM5102 didn't help

Thanks, Rocco...nice writeup om the T41! Jack, W8TEE

Here is the attachment Jack, I recently introduced my cousin, NJ9S, to the T41 project. He's a member of the INDIANA CW SECTION NET and today I received the attached net's monthly bulletin. I thought

No attachment? Jack, W8TEE

Jack, I recently introduced my cousin, NJ9S, to the T41 project. He's a member of the INDIANA CW SECTION NET and today I received the attached net's monthly bulletin. I thought you'd like it. 73

Never used to be that way. I got taken twice at Dayton once a guy bought a nice Mobile Rig that was pristine came back an hour later said it was DOA. When I took it home he had hooked it up backwards.

Unfortunately, there are people out there *** And THAT's why I'm not selling any of my equipment on Ebay- even though one gets the best prices there. I have a shed with rigs & test equipment that I

That would or could have been Dr. Bill's contest station. Tim W4YN

All: I'm selling my one-owner (me), smokeless environment, Flex 6400, mainly because I rarely use it. All my activity lately is QRP, even though I still have an old FT891 if I need more power than 20

The op said they are also on 21.446. -- 73 Greg KF5N

Just worked St Lucia on 10M with my T41, the signal is hammering in to south Florida. I used an MFJ loop antenna, so my radiated power was probably on the order of 1 watt. The contest station call is

So - I was trying to break in to one of those endless 40M roundtables. They weren't hearing me. Even with the amp. Looked over at the power meter - zero output! Huh? Switched to CW, hit the key -

It seems that for local 40M daytime chatter, the EFHW kicks the vertical's butt. To the tune of 3 or 4 S units reported. - Jerry, KF6VB

OK, it's fixed. I had a gigantic 31-mix core that I'd been saving for a rainy day. FT400-31. Ordered some RG400 to make a choke, but looking at that core - I figured I could do it with RG-8. And so I

There is now a 8/16bit parallel library available for the RA8876 displays and accompanying lib for the capacitive touchscreen controller. Was toying with the idea of a twin teensy setup, one dedicated

Thats what line feed chokes are specifically made for. One on each end of the feedline. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch –

try 1:1 between your tuner and the T41. Best regards, Jack Mann W1QZ [email protected]> wrote:

I used to have issues with my FT901 like that, CW would stick in transmit- RF in the shack. A ferrite slug with 6 wraps of the shielded CW key lead after it left the external keyer fixed it. My EFHW