¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date
Re: 160 metres
Follow Jack¡¯s Advice¡­ Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois Owner ¨C Operator Villa Grand
By K9HZ · #32903 ·
Re: 160 metres
Bill, what and where is the latest software? Roger G8JWT
By bty84827531 · #32902 ·
Re: SDT 63-1
Jack, it was from a post from several weeks ago GitHub Link <https://github.com/KI3P/SDTVer063>. Version 63-1 <https://github.com/KI3P/SDTVer063#version-63-1> This version of the code corresponds to
By Robert Luken W3RDL · #32901 ·
Re: SDT 63-1
Where did that code come from? Jack, W8TEE
By jjpurdum · #32900 ·
Re: 160 metres
There¡¯s a lot to that¡­ I would suggest using the latest software version though¡­ and start in the definitions section where the arrays are defined for the bands. Dr. William J. Schmidt - K9HZ
By K9HZ · #32899 ·
Re: BPF L292
Its perfectly acceptable to wind turns over turns¡­ Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois
By K9HZ · #32898 ·
SDT 63-1
I installed all of the required libraries and compiled this version. Looks good, but when I tried to do the Receiver Calibration, it worked like the directions(some of the switches were mapped
By Robert Luken W3RDL · #32897 ·
Re: slow starting on T41 kit
Thank you, I'll carry on, appreciate your saving me scanning over a year's of posts to the lists to check for recommended changes since my kit arrived. So wishing that I was retired already, I'll be
By Ron VE8RT · #32896 ·
Re: slow starting on T41 kit
Your kit does not include the Teensy 4.1 or the Audio Hat, either (available from PJRC.com). The display is ordered from BuyDisplay.com and is a Chinese company so it will take some time. The correct
By jjpurdum · #32895 ·
slow starting on T41 kit
I was furtunate enough to received from Ron AG1P a T41 kit back in December of 2023. The plan to get to it in early 2024 didn't work out, I've just this last week gone through the box and have a good
By Ron VE8RT · #32894 ·
BPF L292
When you get to L292 3.6 uH 20 38 T37-10 Black 20" of #28 wire, 38T on T37-10 You might want to drop down a wire size to #30 I had trouble getting the ones done with 32 turns let alone 38! #30 I was
By Tim · #32893 ·
Re: Tiny Ten Transceiver
Nice, Bob!Jack, W8TEE
By jjpurdum · #32892 ·
Re: Tiny Ten Transceiver
Hello All - I? feel that I have learned a lot by reading posts here on the T41 adventure.? Thanks much.? In exchange, a heads up that I added more detail to the Tiny Ten page.? This is a different
By Bob Larkin · #32891 ·
Re: [?SDX] Digital Interface Transceiver or DIT
here's the video for it..3 FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | | | | | | | | | | FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | |
By jjpurdum · #32890 ·
Re: D Drive problem
Wow, thanks for this. There are so many open source projects out there. I had never heard of syncthing. Right now, I do it with a motley collection of scripts using rsync and NFS mounts. Not perfectly
By jerry-KF6VB · #32889 ·
Re: D Drive problem
I have a "NAS" (Network Attached Storage) device.? It's a dual RAID so it has 2 hard drives with identical data.? If one fails, the other keeps going, and it alerts you that a drive failed.? That
By Greg KF5N · #32888 ·
160 metres
Can someone please explain how to turn back on 160 metres and turn off any other band in SDTVer053? I've had a go at it but it seems there are several tabs involved. Roger G8JWT
By bty84827531 · #32887 ·
Re: D Drive problem
I do easy real-time and private backup of my files over my local network with Syncthing ( https://syncthing.net/ ). I have a computer running in my basement that is on all the time running Syncthing,
By Oliver KI3P · #32886 ·
Re: D Drive problem
Very good news! phew!
By Wayde VA3NCA/AD2GX · #32885 ·
D Drive problem
All: First, my thanks to all who tried to help me solve my drive D problem. My first attempt was to remove the connector, clean and D-ox it, and replace it see what happened, Happy Day! It came up
By jjpurdum · #32884 ·