开云体育

Nice, Bob!Jack, W8TEE

Hello All - I? feel that I have learned a lot by reading posts here on the T41 adventure.? Thanks much.? In exchange, a heads up that I added more detail to the Tiny Ten page.? This is a different

here's the video for it..3 FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | | | | | | | | | | FDIM 2022 Al Peter and Jack Purdum 'T41-EP CW Decoder' | | |

Wow, thanks for this. There are so many open source projects out there. I had never heard of syncthing. Right now, I do it with a motley collection of scripts using rsync and NFS mounts. Not perfectly

I have a "NAS" (Network Attached Storage) device.? It's a dual RAID so it has 2 hard drives with identical data.? If one fails, the other keeps going, and it alerts you that a drive failed.? That

Can someone please explain how to turn back on 160 metres and turn off any other band in SDTVer053? I've had a go at it but it seems there are several tabs involved. Roger G8JWT

I do easy real-time and private backup of my files over my local network with Syncthing ( https://syncthing.net/ ). I have a computer running in my basement that is on all the time running Syncthing,

Very good news! phew!

All: First, my thanks to all who tried to help me solve my drive D problem. My first attempt was to remove the connector, clean and D-ox it, and replace it see what happened, Happy Day! It came up

*** Also, you can put the drive & USB adapter in the fridge or freezer, and run it from there. - Jerry, KF6VB

My sister once had a computer that stopped working.? In her case, the OS was messed up, not the hard drive.? It was easy to recover the data from the hard drive using Linux.? However, it sounds

OK, we're apparently running it at 192kHz. This is supported by the PCM5102 DAC device. Right now, I am looking through USB specs to figure out how to have the radio tell the PC that it's 192ksp. In

You might be able to do that with a Windows machine.? You can get a USB to SATA adapter (plus power supply if required). So you plug the damaged drive into the adapter,? USB into the working Windows

err...Linux system... Jack, W8TEE

Thanks, Jim. So far, nothing has worked, but I still have a few to go. Al has a Linus system so I'll give your idea a shot, too. Thanks!! Jack, W8TEE

Jack You might be able to recover some of your data using a different operating system to look at the drive. If you can create a Linux system which will boot off a USB stick it will look at any drives

There is an I2S bus running at 192ksps.? That drives the audio DAC (and also the ADC).? I'm referring to V11 software, V12 could be different, but probably not. Now in the audio data stream

It's an experimental platform, and it would make an interesting experiment: S/PDIF The I2S port may be used to receive and transmit S/PDIF. The S/PDIF is independent of both I2S/TDM ports and can be

I am not sure I would call the changes to the Audio library a Hack, but each to his own. At least it does not require any hardware changes and a SPDIF interface on the PC. Also it would mean the

So I have the two serial ports AND the audio device working. HOWEVER, the audio received by the PC is garbled. I think there is a sample rate mismatch. Are we running the Teensy audio library at a