开云体育

I found this re the Mini 360 on the web. With respect to using Wall Warts, or any switching power supply I have found the AD 9850 boards from China will generate some serious spurs and really like a

Hi Jack, Regarding the antenna analyzer project, our local QRP club (SLQS- St. Louis QRP Society) currently has an antenna analyzer project underway using the AD9850 DDS, a NANO and a NOKIA 5110

Wondering if there are any specs on the Mini-360 buck regulator that comes with the DDS VFO board. I've been looking at similar Mini-360s on eBay (although different design) and the specs for those

Looks good, Aaron. The case I used is no longer available from Amazon, unless you buy 100 of them! However, I did find another one that is a little different, but still has the hinged lid, which I

Aaron, Great to hear that your prototype is working!? Good luck with the club project -- I hope your members enjoy your presentation and building the radios! 73, -dennis W6DQInyokern CA To:

I've posted a photograph of my prototype in the photos section. For the time being, the boards are sitting on plastic bags and foam pads. :-) The speaker output for the 49-er is being fed into a Radio

Super! Jack, W8TEE To: SoftwareControlledHamRadio@... Sent: Thursday, April 7, 2016 5:03 PM Subject: [SoftwareControlledHamRadio] 40m QRP Transmitter Success ? Afternoon to all.With

The mystery green board is a VSWR bridge. I bought it from kitsandparts Toroids, Ferrites, Parts, Kits, Toroid King, QRP Erector Set http://kitsandparts.com/ Toroids, Ferrites, Parts, Kits, Toroid

Hi. That's great news, any pictures ? I'm waiting for one more part to come in the mail and will be ready to finish mine. Keep us posted. 73s Norbert

Afternoon to all. With everything finally completed, I fired up the first prototype of the 40m QRP Transceiver with the DDS VFO and the 49-er. Happy to report that the unit is up and running. Receive

Dennis: It appears that there has been a change in the library. Try the attached version and see if it works for you with the I2C library. I can't do it right now as I loaned by Forty-9er to a friend.

The class name is capitalized, which is why you see the line: Rotary r = Rotary(2, 3); ? ? ? // Create encoder object and set the pins the rotary encoder uses. ?Must be interrupt pins. in the VFO

Jack, Now I am confused. The rotary library that came with the DDS-VFO is capitalized as is the include in the DDS into file. As is Brian Low’s include library. 73 Gary

You are still using the wrong encoder library. I know this because the include does not use a capital 'R' for the file; it should be lowercase 'r'. Delete the Rotary library that comes with the IDE

Gary, Thanks for going to the trouble of developing a wiring check sheet. I completed all of the tests and it all checks out. I still think this may be a sketch problem: the fact that when I download

Just got back. Been at my mountain property trying to get a cabin built. Will all that you suggest later today. Thanks for the input. To: SoftwareControlledHamRadio@... From:

I've already started it...that's where the photo came from (simulated data). Right now I have it working on a breadboard, but the new part of the circuit is on the homemade board you see in the photo.

Any thoughts to developing an antenna analyzer using the DDS VFO as the core of the analyzer?

Glad to see this up on the site...I'm sure it will be helpful. Jack, W8TEE To: SoftwareControlledHamRadio@... Sent: Wednesday, April 6, 2016 3:25 PM Subject: Re:

A continuity matrix for your encoder issue