Re: Dennis and I need your help
Thanks, Aaron...it's appreciated!
Jack, W8TEE
From: "Aaron Heverin aaronhev@... [SoftwareControlledHamRadio]"
To: SoftwareControlledHamRadio@...
Sent: Tuesday, August 2, 2016 12:05 PM
Subject: Re: [SoftwareControlledHamRadio] Dennis and I need your help
?
Happy to help, Jack. That guy was a bit misinformed and it was clear he got frustrated and perhaps was in a little over his head. All he had to do was ask for help.
Aaron - N2HTL
|
Re: Dennis and I need your help
Happy to help, Jack. That guy was a bit misinformed and it was clear he got frustrated and perhaps was in a little over his head. All he had to do was ask for help.
Aaron - N2HTL
?
A reviewer of our Arduino Projects for Amateur Radio gave us a horrible rating on Amazon. I know some of you have read the book and the fact that you're a member here suggests you might disagree. The DDS file he's says is missing from the download is missing...he's correct in that. However, rather than trying to contact Dennis, me, or the publisher, he just wrote the negative review. In several of his posts, he is implying that Dennis and I never built the projects in the book, including the Forty-9er project in QST.?
I tried to point out that I am accessible to help, but he wants no part of it. If any of you have the time or inclination, could you write a comment saying that I am accessible and that the VFO does work? Such thing can destroy the book's sales, which aren't that great anyway because of so many illegal download sites. At this point, however, it just a matter of principle now.
Thanks!
73, Jack, W8TEE
|
New file uploaded to SoftwareControlledHamRadio
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the SoftwareControlledHamRadio
group.
File : /W6DQ_DDS_VFO.h
Uploaded by : jjpurdum <jjpurdum@...>
Description : The header file for the VFO, Chapter 16.
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
jjpurdum <jjpurdum@...>
|
New file uploaded to SoftwareControlledHamRadio
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the SoftwareControlledHamRadio
group.
File : /W6DQ_DDS_VFO.cpp
Uploaded by : jjpurdum <jjpurdum@...>
Description : The C++ library file for the VFO, Chapter 16
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
jjpurdum <jjpurdum@...>
|
New file uploaded to SoftwareControlledHamRadio
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the SoftwareControlledHamRadio
group.
File : /VFOControlProgram.ino
Uploaded by : jjpurdum <jjpurdum@...>
Description : Main control program for VFO in Chapter 16
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
jjpurdum <jjpurdum@...>
|
Dennis and I need your help
A reviewer of our Arduino Projects for Amateur Radio gave us a horrible rating on Amazon. I know some of you have read the book and the fact that you're a member here suggests you might disagree. The DDS file he's says is missing from the download is missing...he's correct in that. However, rather than trying to contact Dennis, me, or the publisher, he just wrote the negative review. In several of his posts, he is implying that Dennis and I never built the projects in the book, including the Forty-9er project in QST.?
I tried to point out that I am accessible to help, but he wants no part of it. If any of you have the time or inclination, could you write a comment saying that I am accessible and that the VFO does work? Such thing can destroy the book's sales, which aren't that great anyway because of so many illegal download sites. At this point, however, it just a matter of principle now.
Thanks!
73, Jack, W8TEE
|
Re: Need help downloading/installing required software for 49-er
Karl, check your email. Sent you my mailing info.?
Till later Hank K5HDE
Sent from my hand phasor
|
Re: Need help downloading/installing required software for 49-er
Hank; your offer sounds great and I really appreciate it and your time in doing it!? Will?your Nano have all of the software on it for the display as well to make the radio fully functional?? I'll let you know when I get my Nano in the mail to you this week.? Thanks again, Karl, KO8S
On Sunday, July 31, 2016 8:32 PM, "Hank Ellis HankEllis@... [SoftwareControlledHamRadio]" wrote:
?
This is sent offline from the forum.?
Here's the offer. Send me an Arduino Nano. I'll send you one with the basic DDS VFO software installed. I'll check it with my VFO prior to shipment.?
It will be a few days before I can get back to the bench. Out of town for work. Can get it mailed out on Friday.?
Till later Hank K5HDE
Sent from my hand phasor
On Jul 31, 2016, at 15:41, ktschwab@... [SoftwareControlledHamRadio] < SoftwareControlledHamRadio@...> wrote:
?
Jack;
I printed the DOC file above and tried to work through that today; no luck, because of my inexperience with computer downloads, files, and such things.? I was confused too, on installing the "non-standard libraries, that are found at the top of the AA source code file."
I was able to upload the "blink" sketch successfully though, but that is it.? After the blink sketch, I was looking for the rotary encoder sketch, to test that component, and I was not able to find it.??I?know that that I have a lot of required files missing.
With that being said, would it be possible for readers of this forum, that were successful on their build, to somehow supply me with the necessary software for this project, on a thumb drive or Arduino Nano, let's say; I can supply one or both of these items to the volunteer?? Otherwise, I am really going to
be stuck.? With good working software, I'll then know for sure if I have any hardware/wiring issues in?my build.?
Thanking you all in advance, I am, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
This is sent offline from the forum.?
Here's the offer. Send me an Arduino Nano. I'll send you one with the basic DDS VFO software installed. I'll check it with my VFO prior to shipment.?
It will be a few days before I can get back to the bench. Out of town for work. Can get it mailed out on Friday.?
Till later Hank K5HDE
Sent from my hand phasor
toggle quoted message
Show quoted text
On Jul 31, 2016, at 15:41, ktschwab@... [SoftwareControlledHamRadio] < SoftwareControlledHamRadio@...> wrote:
?
Jack;
I printed the DOC file above and tried to work through that today; no luck, because of my inexperience with computer downloads, files, and such things.? I was confused too, on installing the "non-standard libraries, that are found at the top of the AA source code file."
I was able to upload the "blink" sketch successfully though, but that is it.? After the blink sketch, I was looking for the rotary encoder sketch, to test that component, and I was not able to find it.??I?know that that I have a lot of required files missing.
With that being said, would it be possible for readers of this forum, that were successful on their build, to somehow supply me with the necessary software for this project, on a thumb drive or Arduino Nano, let's say; I can supply one or both of these items to the volunteer?? Otherwise, I am really going to
be stuck.? With good working software, I'll then know for sure if I have any hardware/wiring issues in?my build.?
Thanking you all in advance, I am, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
Jack;
I printed the DOC file above and tried to work through that today; no luck, because of my inexperience with computer downloads, files, and such things.? I was confused too, on installing the "non-standard libraries, that are found at the top of the AA source code file."
I was able to upload the "blink" sketch successfully though, but that is it.? After the blink sketch, I was looking for the rotary encoder sketch, to test that component, and I was not able to find it.??I?know that that I have a lot of required files missing.
With that being said, would it be possible for readers of this forum, that were successful on their build, to somehow supply me with the necessary software for this project, on a thumb drive or Arduino Nano, let's say; I can supply one or both of these items to the volunteer?? Otherwise, I am really going to be stuck.? With good working software, I'll then know for sure if I have any hardware/wiring issues in?my build.?
Thanking you all in advance, I am, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
The attached Word DOC file contains suggestions for installing the IDE and downloading/installing libraries.
Jack, W8TEE
From: "ktschwab@... [SoftwareControlledHamRadio]"
To: SoftwareControlledHamRadio@...
Sent: Saturday, July 30, 2016 12:22 PM
Subject: [SoftwareControlledHamRadio] Re: Need help downloading/installing required software for 49-er
?
This is the basic problem, I do not know enough about downloading, unzipping and installing the required software for this project.? If I did, I would have this project up and running, probably.? 73, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
This is the basic problem, I do not know enough about downloading, unzipping and installing the required software for this project.? If I did, I would have this project up and running, probably.? 73, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
Sounds like you need to add the Wire Library. This link should held.
| | | | | | Getting Started | TUTORIALS
> Libraries English English ÖÐÎÄ (Chinese) Installing Additional Arduino Libraries On this page... (hide) What are Libraries? H... | | | | Preview by Yahoo | | | ?
Good job on the case,. I'm impressed!!
|
Re: Need help downloading/installing required software for 49-er
Attached hereto, are?photos of my 49-er build and it is now ready for the software application.? The metal was taken from a old computer desktop power supply case.? I had to do some cutting and riveting to get it to the size I wanted and to eliminate some of the unnecessary cutouts.? The top and sides will be?clear plastic so all of the electronics can be seen and enjoyed!? 73, de Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
Wow!? Thanks Jack, John and N0ngq for your responses to my (this) thread.? I can see now, that I am WAY over my head with this required, downloading of software.? For example, I tried to download the recommended sketch that would determine what liquid crystal display that I have.? I tried that, and in compiling that sketch, I got an error-stray # in program line 30, #include wire.h?
John advised that I increase the brightness of the display, and perhaps that would show characters; it got bright with adjustment, but no characters, only squares.? Also, I noticed that the back of the display board has a red LED lite when powered up.?
At this point, I will take Jack's advise and seek someone in the Detroit area (I do not belong to a radio club at this point of my life), or perhaps someone on a local repeater, that can help me with this software for this project.? Better yet, someone that?has completed this projected successfully.?
I feel quite confident, that my soldering and wiring is accurate, although, there is always a chance of error.? All components are mounted in my homemade case and I think that it looks very, very nice!? If I can find a way to attached a photo or two here of it, I will do that next.?
Regards, Karl, KO8S
|
Re: Need help downloading/installing required software for 49-er
Good advice!
>>>> As a rule, if I'm buying something new on the Internet, like a display, I?always?ask the vendor which library the device uses. If they can't answer that question, I look for another vendor.
Jack, W8TEE
|
Re: Need help downloading/installing required software for 49-er
Also, it is common for the constructor that creates the LCD object to be overloaded. For example, the code from our project uses:
LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); ?// Create LCD object and set the LCD I2C address
which is different from many constructors. You may have to experiment a little before you find what matches the display you are using. As a rule, if I'm buying something new on the Internet, like a display, I always ask the vendor which library the device uses. If they can't answer that question, I look for another vendor.
Jack, W8TEE
From: "n0ngq@... [SoftwareControlledHamRadio]"
To: SoftwareControlledHamRadio@...
Sent: Wednesday, July 27, 2016 9:27 AM
Subject: [SoftwareControlledHamRadio] Re: Need help downloading/installing required software for 49-er
?
Another thing to watch for is the?LCD I2C address "(0x27, 16, 2)"?in line 99, I have some that are 0x27 and others that are?0xF3. I marked the address on the PCB on the ones I have.
LiquidCrystal_I2C lcd(0x27, 16, 2); ?// Create LCD object and set the LCD I2C address
The link below will help find the correct address.
| | | | // -------------------------------------- // i2c_scanner // // Version 1 // ? ?This program (or code that looks like it) // ? ?can be found in many places. // ? ?For example on the Arduino.cc forum. | | | | Preview by Yahoo | | |
?
|
Re: Need help downloading/installing required software for 49-er
Another thing to watch for is the?LCD I2C address "(0x27, 16, 2)"?in line 99, I have some that are 0x27 and others that are? 0xF3. I marked the address on the PCB on the ones I have.
LiquidCrystal_I2C lcd(0x27, 16, 2); ?// Create LCD object and set the LCD I2C address
The link below will help find the correct address.
| | | | // -------------------------------------- // i2c_scanner // // Version 1 // ? ?This program (or code that looks like it) // ? ?can be found in many places. // ? ?For example on the Arduino.cc forum. | | | | Preview by Yahoo | | | ?
|
Re: Need help downloading/installing required software for 49-er
Hi Karl The solution could be that you haven?t adjusted the display contrast! On the backside of the display, there is a small (blue?) potentiometer. You have to adjust this, when you see the 16 squares on the display. When you adjust the potmeter, the squares will disapper, but hopefully you will see charaters instead. Adjust for best readability, and forget all about it, hereafter.
73 de OZ1QZ / John
|
Re: Need help downloading/installing required software for 49-er
First, make sure you have the latest version of the Forty-9er software from Farrukh's site:
?www.farrukhzia.com/k2zia?
Second, there are non-standard libraries that must be installed in the libraries subdirectory of where you installed the IDE. You can find any missing libraries by doing a search on the #include files:
#include ????????? // From Brian Low: https://github.com/brianlow/Rotary #include ? ?// Shipped with IDE #include ? ? ? ? ? ?// ? ? ? ? "
// Get the LCD I2C Library here: // https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads // Move all *_I2C files into a new folder named LiquidCrystal_I2C // in the Arduino library folder #include
Note that there are a bunch of libraries that use the same name, but are actually different. For example, the #include is NOT the same as #include ...case makes a difference! Put the correct libraries in the libraries subdirectory.
The fact that Blink works means you've installed the IDE software correctly. The fact that the rig doesn't work, unfortunately, could be hardware, software, or both. Just because the code compiles without error does NOT mean you're using the correct libraries. Check those first.?
If that doesn't work and you belong to a club, see if one of the members can help you track down the error.
Jack, W8TEE
From: "ktschwab@... [SoftwareControlledHamRadio]" To: SoftwareControlledHamRadio@...
Sent: Tuesday, July 26, 2016 8:30 PM
Subject: [SoftwareControlledHamRadio] Need help downloading/installing required software for 49-er
?
Gentlemen:?
With the hardware all connected, I powered up the Arduino from my computers USB port, and the LED on both the Arduino?and DDS board lit up as well as the blank (16 square segments only) liquid crystal display.? I then uploaded the?"Blink" sketch, and the LED on the Arduino blinked away.? I then uploaded the Liquid Crystal?sketch with no change.? I then looked for the Rotary.zip file and I was not able to find that in my downloads, so I suspect, I have done something wrong in downloading both of these files.? I will have to confess; downloading software and getting it running is new to me!? The hardware part of this project, I feel that I have done pretty good at.? So gentlemen; what steps can I take to go on from here?? Thank you all in advance, de Karl, KO8S
|
jjpurdum