Never used to be that way. I got taken twice at Dayton once a guy bought a nice Mobile Rig that was pristine came back an hour later said it was DOA.
When I took it home he had hooked it up backwards.
Another time I sold a nice fully loaded HF rig, guy came back said he had an emergency and needed money back.?
When I got home the rig had been gutted!?
Very sad you can't trust anyone these days.
Tim W4YN
|
On 2025-03-02 13:41, jjpurdum via groups.io wrote: All:
Unfortunately, there are people out there who take delivery of equipment, strip out key parts, and then try to
return it. *** And THAT's why I'm not selling any of my equipment on Ebay- even though one gets the best prices there. I have a shed with rigs & test equipment that I don't use, and a closet with more. And even more in the garage. Well, it's also a lot of work to sell stuff. Put up the ad, talk to people about it, get offers, agree on something - figure out how to pack it and ship it... I might sell at one of the local ham swaps. Not the same pricing power as Ebay, but so much simpler. Show up, somebody hands you the cash, you hand him the rig. There used to be a local store where you could put stuff on consignment. It was called "HRO". Sadly, they have abandoned us. They closed both of their SF Bay Area stores. They still have a store in Sacramento, but that's too far to drive. - Jerry, KF6VB
|
Re: Bill's SSB Contest Station 28.452
That would or could have been Dr. Bill's contest station.
Tim W4YN
|
All:
I'm selling my one-owner (me), smokeless environment, Flex 6400, mainly because I rarely use it. All my activity lately is QRP, even though I still have an old FT891 if I need more power than 20 or less watts. It's three years old, but probably has less than 20 hours on it. It's in mint shape with no scratches or dents. I include the Flex 6400, the mic, an Anderson Power Pole cable, and I'll put the software on a flash drive. I never saw the need to update the software, so that's all original, too.
I prefer a pick-up deal and am willing to drive up to 100 miles from Cincinnati to deliver it. Unfortunately, there are people out there who take delivery of equipment, strip out key parts, and then try to return it. As a result, this a cash-only deal with no returns. I realize that sounds harsh, but I got burned a few years back. As for me, I'm too easy to find to try and screw anyone over. The price is $1750, delivered. If someone wants to buy outside that radius, the buyer pays shipping and insurance charges.
Interested parties should contact me at jjpurdum at yahoo dot com.
Jack, W8TEE -- Jack, W8TEE
|
Re: Bill's SSB Contest Station 28.452
The op said they are also on 21.446.
?
--
73 Greg KF5N
|
Bill's SSB Contest Station 28.452
Just worked St Lucia on 10M with my T41, the signal is hammering in to south Florida. I used an MFJ loop antenna, so my radiated power was probably on the order of 1 watt.
The contest station call is J62K.
?
--
73 Greg KF5N
|
So - I was trying to break in to one of those endless 40M roundtables. They weren't hearing me.
Even with the amp. Looked over at the power meter - zero output! Huh?
Switched to CW, hit the key - normal output.
Stuck my oscilloscope on the IQ inputs to the RF card - no talky-waveform. OH, no! Did something break?
Do I have to do hardware troubleshooting? Waah!
Nope, I don't. The problem is the transmit equalizer. For some reason, if you turn it on, it sets all the bands to zero. Set them up properly, go back to transmit...and they're zero again.
Guess I'll upload Al's latest and see how that does.
WRT equalization: I'd like to have a couple quick-modes for that: "Ragchew mode" - nice flat response,
mellow lows - and DX/Contest mode - lows suppressed, mid-highs accentuated for punch. Maybe I'll code
something.
- Jerry, KF6VB
|
It seems that for local 40M daytime chatter, the EFHW kicks the vertical's butt.
To the tune of 3 or 4 S units reported.
- Jerry, KF6VB
toggle quoted message
Show quoted text
On 2025-03-01 15:49, jerry-KF6VB wrote: OK, it's fixed.
I had a gigantic 31-mix core that I'd been saving for a rainy day. FT400-31.
Ordered some RG400 to make a choke, but looking at that core - I figured I
could do it with RG-8. And so I did. 12 turns. Took some real pulling and
grabbing.
No more feedback.
- Jerry, KF6VB
On 2025-02-28 16:56, K9HZ wrote:
Thats what line feed chokes are specifically made for. One on each
end of the feedline.
DR. WILLIAM J. SCHMIDT - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ
Owner - Operator
Big Signal Ranch ¨C K9ZC
Staunton, Illinois
Owner ¨C Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com
email: bill@...
On Feb 28, 2025, at 5:59?PM, Larry Acklin via groups.io
<acklin@...> wrote: ?
I used to have issues with my FT901 like that, CW would stick in
transmit- RF in the shack. A ferrite slug with 6 wraps of the
shielded CW key lead after it left the external keyer fixed it.
My EFHW starts at 30 ft and slopes to 10, counterpoise drops to 6 ft
and runs along roughly the same route. 40, 20, 15, 10 all acceptable
SWR. 49:1 balun feeds coax to the radio.
Larry
KB3CUF
On Fri, Feb 28, 2025 at 2:57?PM jerry-KF6VB via groups.io [1]
<jerry@...> wrote:
Hello all,
I was trying out my station with a second antenna - an 65-foot
End
Fed Half Wave. I had built it to the kilowatt level, with a big
toroid
core on the matching transformer. Instead of a counterpoise, I
used an
8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
The far end of the antenna is supported by a monster oak tree
on my
property. Got it up there with a slingshot.
I hooked up a spare MFJ998RT autotuner to the EFHW and thence
to my
station through
a 40-foot length of Davis Buryflex RG/8.
It worked fine on the base T41 - decent SWR on 40, 20 & 15M.
And it
actually worked
on 80 - although the autotuner was clearly struggling.
HOWEVER, when I turned on my KW amp, I pushed the PTT, and the
power
immediately rose to 950W or so out...without me talking. And
somebody
on the frequency said "what's that noise?".
I figure that RF is getting back into the T41.
Probably need to stick a counterpoise on the EFHW, and maybe a
common
mode choke.
My main antenna does not give me any such problems; it's a
trap
vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80
feet
of thick copper wire embedded in a 10 by 70' concrete slab.
I'm trying the EFHW to see if it's any quieter than my
vertical. So
far, it's about the same.
- Jerry, KF6VB Links:
------
[1]
[2] /g/SoftwareControlledHamRadio/message/33004
[3] /mt/111440976/243852
[4] /g/SoftwareControlledHamRadio/post
[5] /g/SoftwareControlledHamRadio/editsub/243852
[6]
/g/SoftwareControlledHamRadio/leave/10484476/243852/1943518115/xyzzy
|
OK, it's fixed.
I had a gigantic 31-mix core that I'd been saving for a rainy day. FT400-31.
Ordered some RG400 to make a choke, but looking at that core - I figured I
could do it with RG-8. And so I did. 12 turns. Took some real pulling and
grabbing.
No more feedback.
- Jerry, KF6VB
toggle quoted message
Show quoted text
On 2025-02-28 16:56, K9HZ wrote: Thats what line feed chokes are specifically made for. One on each
end of the feedline.
DR. WILLIAM J. SCHMIDT - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ
PJ2/K9HZ
Owner - Operator
Big Signal Ranch ¨C K9ZC
Staunton, Illinois
Owner ¨C Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com
email: bill@...
On Feb 28, 2025, at 5:59?PM, Larry Acklin via groups.io
<acklin@...> wrote: ?
I used to have issues with my FT901 like that, CW would stick in
transmit- RF in the shack. A ferrite slug with 6 wraps of the
shielded CW key lead after it left the external keyer fixed it.
My EFHW starts at 30 ft and slopes to 10, counterpoise drops to 6 ft
and runs along roughly the same route. 40, 20, 15, 10 all acceptable
SWR. 49:1 balun feeds coax to the radio.
Larry
KB3CUF
On Fri, Feb 28, 2025 at 2:57?PM jerry-KF6VB via groups.io [1]
<jerry@...> wrote:
Hello all,
I was trying out my station with a second antenna - an 65-foot
End
Fed Half Wave. I had built it to the kilowatt level, with a big
toroid
core on the matching transformer. Instead of a counterpoise, I
used an
8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
The far end of the antenna is supported by a monster oak tree
on my
property. Got it up there with a slingshot.
I hooked up a spare MFJ998RT autotuner to the EFHW and thence
to my
station through
a 40-foot length of Davis Buryflex RG/8.
It worked fine on the base T41 - decent SWR on 40, 20 & 15M.
And it
actually worked
on 80 - although the autotuner was clearly struggling.
HOWEVER, when I turned on my KW amp, I pushed the PTT, and the
power
immediately rose to 950W or so out...without me talking. And
somebody
on the frequency said "what's that noise?".
I figure that RF is getting back into the T41.
Probably need to stick a counterpoise on the EFHW, and maybe a
common
mode choke.
My main antenna does not give me any such problems; it's a
trap
vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80
feet
of thick copper wire embedded in a 10 by 70' concrete slab.
I'm trying the EFHW to see if it's any quieter than my
vertical. So
far, it's about the same.
- Jerry, KF6VB Links:
------
[1]
[2] /g/SoftwareControlledHamRadio/message/33004
[3] /mt/111440976/243852
[4] /g/SoftwareControlledHamRadio/post
[5] /g/SoftwareControlledHamRadio/editsub/243852
[6]
/g/SoftwareControlledHamRadio/leave/10484476/243852/1943518115/xyzzy
|
Re: [AmateurRadioBuilders] RP Pico 2
There is now a 8/16bit parallel?library available for the RA8876 displays and accompanying lib for the capacitive touchscreen controller. Was toying with the idea of a twin teensy setup, one dedicated to the display and one for the DSP work, data xfer between the?two would be over ethernet as it offers high speed and the 16bit connection consumes a lot of the pins on the teensy connected to the display.
Might be a good way to get around memory limitations and you could still use a pico pi connected to the DSP teensy to handle the I/O stuff and provide WiFi connectivity which in turn opens up all sorts of possibilities for integration with online API's.Now that we have decent code build to work with I might try to do some testing over the next while to see if I can get this setup to work. Already have the display working with a parallel?connection just need to determine how well firing the waterfall array data across the ethernet works and it doesn't mess up the audio on the DSP teensy. It will be an interesting experiment!
You didn't read what I said. Each "page" (your term, not mine) is a segment of the display and only that gets updated.
Jack, W8TEE
On Friday, February 28, 2025 at 12:13:08 PM EST, jerry-KF6VB < jerry@...> wrote:
On 2025-02-28 08:46, jjpurdum via wrote:
> I think the Teensy could work with only 3 function calls to the Pico
> (or whatever??) processor for each page:
*** It should be more granular than that.? If a new S-meter reading
comes in,
the Pico shouldn't have to update the entire display.
? ? ? ? ? ? ? - Jerry,KF6VB
--
Jack, W8TEE
|
Thats what line feed chokes are specifically made for. ?One on each end of the feedline. ?
Dr.?William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com
email:??bill@... ?
toggle quoted message
Show quoted text
On Feb 28, 2025, at 5:59?PM, Larry Acklin via groups.io <acklin@...> wrote:
? I used to have issues with my FT901 like that, CW would stick in transmit- RF in the shack. A ferrite slug with 6 wraps of the shielded?CW key lead after it left the external keyer fixed it.?
My EFHW starts at 30 ft and slopes to 10, counterpoise drops to 6 ft and runs along roughly the same route. 40, 20, 15, 10 all acceptable SWR. 49:1 balun feeds coax to the radio.?
Larry KB3CUF? Hello all,
? ? I was trying out my station with a second antenna - an 65-foot End
Fed Half Wave.? I had built it to the kilowatt level, with a big toroid
core on the matching transformer.? Instead of a counterpoise, I used an
8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
? ?The far end of the antenna is supported by a monster oak tree on my
property.? Got it up there with a slingshot.
? ? I hooked up a spare MFJ998RT autotuner to the EFHW and thence to my
station through
a 40-foot length of Davis Buryflex RG/8.
? ? It worked fine on the base T41 - decent SWR on 40, 20 & 15M.? And it
actually worked
on 80 - although the autotuner was clearly struggling.
? ?HOWEVER, when I turned on my KW amp, I pushed the PTT, and the power
immediately rose to 950W or so out...without me talking.? And somebody
on the frequency said "what's that noise?".
? ?I figure that RF is getting back into the T41.
? ?Probably need to stick a counterpoise on the EFHW, and maybe a common
mode choke.
? ?My main antenna does not give me any such problems;? it's a trap
vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80 feet
of thick copper wire embedded in a 10 by 70' concrete slab.
? ?I'm trying the EFHW to see if it's any quieter than my vertical.? So
far, it's about the same.
? ? ? ? ? ? ? ? ? ? ? ? - Jerry, KF6VB
|
try 1:1 between your tuner and the T41. Best regards,
Jack Mann W1QZ
I used to have issues with my FT901 like that, CW would stick in transmit- RF in the shack. A ferrite slug with 6 wraps of the shielded?CW key lead after it left the external keyer fixed it.?
My EFHW starts at 30 ft and slopes to 10, counterpoise drops to 6 ft and runs along roughly the same route. 40, 20, 15, 10 all acceptable SWR. 49:1 balun feeds coax to the radio.?
Larry KB3CUF?
Hello all,
? ? I was trying out my station with a second antenna - an 65-foot End
Fed Half Wave.? I had built it to the kilowatt level, with a big toroid
core on the matching transformer.? Instead of a counterpoise, I used an
8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
? ?The far end of the antenna is supported by a monster oak tree on my
property.? Got it up there with a slingshot.
? ? I hooked up a spare MFJ998RT autotuner to the EFHW and thence to my
station through
a 40-foot length of Davis Buryflex RG/8.
? ? It worked fine on the base T41 - decent SWR on 40, 20 & 15M.? And it
actually worked
on 80 - although the autotuner was clearly struggling.
? ?HOWEVER, when I turned on my KW amp, I pushed the PTT, and the power
immediately rose to 950W or so out...without me talking.? And somebody
on the frequency said "what's that noise?".
? ?I figure that RF is getting back into the T41.
? ?Probably need to stick a counterpoise on the EFHW, and maybe a common
mode choke.
? ?My main antenna does not give me any such problems;? it's a trap
vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80 feet
of thick copper wire embedded in a 10 by 70' concrete slab.
? ?I'm trying the EFHW to see if it's any quieter than my vertical.? So
far, it's about the same.
? ? ? ? ? ? ? ? ? ? ? ? - Jerry, KF6VB
|
I used to have issues with my FT901 like that, CW would stick in transmit- RF in the shack. A ferrite slug with 6 wraps of the shielded?CW key lead after it left the external keyer fixed it.?
My EFHW starts at 30 ft and slopes to 10, counterpoise drops to 6 ft and runs along roughly the same route. 40, 20, 15, 10 all acceptable SWR. 49:1 balun feeds coax to the radio.?
Larry KB3CUF?
Hello all,
? ? I was trying out my station with a second antenna - an 65-foot End
Fed Half Wave.? I had built it to the kilowatt level, with a big toroid
core on the matching transformer.? Instead of a counterpoise, I used an
8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
? ?The far end of the antenna is supported by a monster oak tree on my
property.? Got it up there with a slingshot.
? ? I hooked up a spare MFJ998RT autotuner to the EFHW and thence to my
station through
a 40-foot length of Davis Buryflex RG/8.
? ? It worked fine on the base T41 - decent SWR on 40, 20 & 15M.? And it
actually worked
on 80 - although the autotuner was clearly struggling.
? ?HOWEVER, when I turned on my KW amp, I pushed the PTT, and the power
immediately rose to 950W or so out...without me talking.? And somebody
on the frequency said "what's that noise?".
? ?I figure that RF is getting back into the T41.
? ?Probably need to stick a counterpoise on the EFHW, and maybe a common
mode choke.
? ?My main antenna does not give me any such problems;? it's a trap
vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80 feet
of thick copper wire embedded in a 10 by 70' concrete slab.
? ?I'm trying the EFHW to see if it's any quieter than my vertical.? So
far, it's about the same.
? ? ? ? ? ? ? ? ? ? ? ? - Jerry, KF6VB
|
Re: T41 V66.4 with Code Revisions
OK, just had not heard it used that way.
On Friday, February 28, 2025 at 02:35:08 PM EST, Peter McCracken EI3JCB via groups.io <peter.mccracken@...> wrote:
Come now Jack.... I'm sure you have heard the term "cracked the case" before... same deal.... :))
Well you would want this to read out in WATTS¡ not db reduction¡ ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: ? Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. ? email:? bill@... ? ? ? It is working correctly, but the readout is confusing. Next round I will fix it to read in dB, from 0 to -31dB.
--
Jack, W8TEE
|
Re: T41 V66.4 with Code Revisions
Hi Al, Ver 066_4 is a "Winner,Winner, Chicken Dinner" as a couple of T41 experts I know would say. I was able to calibrate Xmit IQ all bands without a problem using the receiver of my FT991A. Had a couple of minor issues, one with display, which you are probably aware of. When adjusting IQ Phase with .001 resolution the last digit appears to not being erased but overwritten with the new numbert and after a couple of twists of the dial you cannot read the number. I have also copied the EEPROM dump and SD card dump (attached PDF) after copying EEPROM to SD and it looks like a formatting issue in the EEPROM Dump first line. The 80M number seems to not being copied into the SD, throwing the number to band correlation off. Not sure how that would affect the order and placement and did not want to try coping the SD back to EEPROM for fear of shifting the placement order. Thanks again for getting this working correctly. Rick, KN4AIE On Fri, Feb 28, 2025 at 8:26?AM Albert Peter via groups.io <albertfpeter@...> wrote:
Hi Everyone,
Had some good feedback on the versions 66.1 and 66.3. The attached update fixes the known problems.
Fixes include issues with the SSB transmit cal and power levels, which were caused primarily because of improper initial values. I tried these several times and everything appears to work properly.
The initial setup should be performed in the following order:
1. Frequency Cal
2. Receive cal
3. Set SSB Power Level to 10W
4. Preliminary SSB PA Power cal to ensure levels are nearly correct
5. Transmit IQ calibration
6. Set CW Power level to 10W
7. CW PA Power level cal
8. Check SSB PA Power Cal. one final time
Again, it is best to erase the Teensy to start over with the new EEPRM values and be sure to uncomment line 3163 of the .ino file. Comment out again after the initial download.
Other changes were primarily to fix a couple of the increments and to correct the on-screen text in a few spots.
A revised instructions PDF will follow.
Al
AC8GY
|
Hello all,
I was trying out my station with a second antenna - an 65-foot End Fed Half Wave. I had built it to the kilowatt level, with a big toroid core on the matching transformer. Instead of a counterpoise, I used an 8-foot ground rod - the kind they sell to ground your house.
Probably needs a counterpoise also...
The far end of the antenna is supported by a monster oak tree on my property. Got it up there with a slingshot.
I hooked up a spare MFJ998RT autotuner to the EFHW and thence to my station through
a 40-foot length of Davis Buryflex RG/8.
It worked fine on the base T41 - decent SWR on 40, 20 & 15M. And it actually worked
on 80 - although the autotuner was clearly struggling.
HOWEVER, when I turned on my KW amp, I pushed the PTT, and the power immediately rose to 950W or so out...without me talking. And somebody on the frequency said "what's that noise?".
I figure that RF is getting back into the T41.
Probably need to stick a counterpoise on the EFHW, and maybe a common mode choke.
My main antenna does not give me any such problems; it's a trap vertical up the hill,
and it has an excellent ground - an Ufer ground, consisting of 80 feet of thick copper wire embedded in a 10 by 70' concrete slab.
I'm trying the EFHW to see if it's any quieter than my vertical. So far, it's about the same.
- Jerry, KF6VB
|
Re: T41 V66.4 with Code Revisions
Come now Jack.... I'm sure you have heard the term "cracked the case" before... same deal.... :))
Well you would want this to read out in WATTS¡ not db reduction¡ ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: ? Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. ? email:? bill@... ? ? ? It is working correctly, but the readout is confusing. Next round I will fix it to read in dB, from 0 to -31dB.
|
Re: T41 V66.4 with Code Revisions
Well you would want this to read out in WATTS¡ not db reduction¡ ? ? Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ ? Owner - Operator Big Signal Ranch ¨C K9ZC Staunton, Illinois ? Owner ¨C Operator Villa Grand Piton ¨C J68HZ Soufriere, St. Lucia W.I. Rent it: ? Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. ? email:? bill@... ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Albert Peter via groups.io
Sent: Friday, February 28, 2025 11:44 AM
To: [email protected]
Subject: Re: [SoftwareControlledHamRadio] T41 V66.4 with Code Revisions? It is working correctly, but the readout is confusing. Next round I will fix it to read in dB, from 0 to -31dB.
|
Re: T41 V66.4 with Code Revisions
Roger,
It is working correctly, but the readout is confusing.
Next round I will fix it to read in dB, from 0 to -31dB.
Thanks,
Al
AC8GY
|
Re: [AmateurRadioBuilders] Alternative to Pico?
No. Standard IDE. Jack, W8TEE
On Friday, February 28, 2025 at 12:21:16 PM EST, jerry-KF6VB <jerry@...> wrote:
On 2025-02-28 06:29, Jack, W8TEE via groups.io wrote:
> All:
>
> I've also experimented with the XIAO processor from Seeed Studio. It's
> about the size of your thumbnail and costs $5:
*** Hardware debug? ? ? ? ? ? ? ? ? ? - Jerry, KF6VB
-- Jack, W8TEE
|
jjpurdum
K9HZ