开云体育

Some OpenAudio library objects, AudioConvertxx for example, can't be disabled.? They continue to process as long they receive data.? It wouldn't be difficult to derive a class that could be

Hi Mark- I use a combination of switches and mixers because some things have to be both disabled and bypassed.? For example, the receiver equalizer can be active, or inactive and bypassed. So I do

Greg: I haven't been following closely along, but I thought it might be helpful to pass along the method that I have successfully employed in my TeensyMIDIPolySynth project (a MIDI-driven 3-voice,

I think there's a conflict. In the SDT.h header file around line 50 is the note: // ============ AFP 09-04-23 #include modified Si5351 library// == Modified Si library must be included in folder with

Hi Jack.? Thanks for the reply. Even though I have: I'm still getting: I forgot just how challenging it can be getting everything in the right places. . . Duane - K5CA

Duane: Those are function calls that the linker cannot find. This is usually caused by forgetting to #include some specific library. Look in the SDT.h header file, near the top, to see a list of the

Hi everyone.? Its been a LONG time since I've done any compiling, so I don't know how to go about understanding the meaning of : undefined reference to. . . Would someone be so kind to enlighten me?

So in the Teensy library you can do connect/disconnect.? But to do that, you have to use the name of the connection.? That's painful if you rearrange things and are forced to rename the connections.

As long as you stay within the OpenAudio library.? However, that library has some limitations.? For example, the AudioConnection_F32 class doesn't have a disconnect method and the connect method is

Hi Terrance, so at this point at least the I16 to F32 converters would not be required? If so, that would be a nice simplification that would be? worth it even without the I32 IO. -- 73 Greg KF5N

Porting the I16 quad I2S objects over to the OpenAudio library wasn't too hard if you ignore the configuration change needed for I32 input and output.? Here is the output from a PassThroughQuad_F32

I shipped the UK/EU T41 V12 /K9HZ /K9HZ+KI3P boards and kits order to Andy Rutter today for sales and distribution in that region. Thanks Andy! And I really appreciate everyone's patients with me in

Yeah I did that too… was because my eyes are not that good anymore… Dr. William J. Schmidt - K9HZ J62K(J68HZ) 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch –

Looks good… Dr. William J. Schmidt - K9HZ J62K(J68HZ) 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton

Well I got my problem fixed. Watch the cable connections on the IDC . What I thought was pin 1 was not, check the boards. Made correct cable and it works. Tom AB9EK

Well they arrived, but are shy of the specified pin dimensions. Instead of 0.40mm they are 0.34 mm. At least they are the full row, so I don't need to patch two together. John K1JO

I see he sells header pins with different colors. I find these really handy for identifying test points on a board (e.g., red for voltage TPs, yellow for general purpose TP's, etc.) Jack, W8TEE

This is the stacking header that is arriving today, for the Teensy to Audio Hat adapter. I hope it is better than what I got from Tayda Electronics.

also try https://protosupplies.com/ quality stuff, nice OM also Tim W4YN He also has some cool Teensy STUFF!

That’s not bad… about $0.14 per stick. Dr. William J. Schmidt - K9HZ J62K(J68HZ) 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner