开云体育

Never used to be that way. I got taken twice at Dayton once a guy bought a nice Mobile Rig that was pristine came back an hour later said it was DOA. When I took it home he had hooked it up backwards.

Unfortunately, there are people out there *** And THAT's why I'm not selling any of my equipment on Ebay- even though one gets the best prices there. I have a shed with rigs & test equipment that I

That would or could have been Dr. Bill's contest station. Tim W4YN

All: I'm selling my one-owner (me), smokeless environment, Flex 6400, mainly because I rarely use it. All my activity lately is QRP, even though I still have an old FT891 if I need more power than 20

The op said they are also on 21.446. -- 73 Greg KF5N

Just worked St Lucia on 10M with my T41, the signal is hammering in to south Florida. I used an MFJ loop antenna, so my radiated power was probably on the order of 1 watt. The contest station call is

So - I was trying to break in to one of those endless 40M roundtables. They weren't hearing me. Even with the amp. Looked over at the power meter - zero output! Huh? Switched to CW, hit the key -

It seems that for local 40M daytime chatter, the EFHW kicks the vertical's butt. To the tune of 3 or 4 S units reported. - Jerry, KF6VB

OK, it's fixed. I had a gigantic 31-mix core that I'd been saving for a rainy day. FT400-31. Ordered some RG400 to make a choke, but looking at that core - I figured I could do it with RG-8. And so I

There is now a 8/16bit parallel library available for the RA8876 displays and accompanying lib for the capacitive touchscreen controller. Was toying with the idea of a twin teensy setup, one dedicated

Thats what line feed chokes are specifically made for. One on each end of the feedline. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch –

try 1:1 between your tuner and the T41. Best regards, Jack Mann W1QZ [email protected]> wrote:

I used to have issues with my FT901 like that, CW would stick in transmit- RF in the shack. A ferrite slug with 6 wraps of the shielded CW key lead after it left the external keyer fixed it. My EFHW

OK, just had not heard it used that way.

Hi Al, Ver 066_4 is a "Winner,Winner, Chicken Dinner" as a couple of T41 experts I know would say. I was able to calibrate Xmit IQ all bands without a problem using the receiver of my FT991A. Had a

Hello all, I was trying out my station with a second antenna - an 65-foot End Fed Half Wave. I had built it to the kilowatt level, with a big toroid core on the matching transformer. Instead of a

Come now Jack.... I'm sure you have heard the term "cracked the case" before... same deal.... :)) [email protected]> wrote:

Well you would want this to read out in WATTS… not db reduction… Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Owner - Operator Big Signal Ranch – K9ZC

Roger, It is working correctly, but the readout is confusing. Next round I will fix it to read in dB, from 0 to -31dB. Thanks, Al AC8GY

No. Standard IDE.Jack, W8TEE