开云体育

goto button v2 vs v3

Dave Lillis All Messages By This Member #6531 Hi, Ive a quick question about V2 and V3 servocats. I've a V2 that has a goto cable/button plugged into the aux/ag port, is uses 2 of the positions in the 6 core RJ11 port and works perfectly, should this also work on the V3? ? I've tried in on another scope that has a V3, but cant get it to to work. :( ? Thanks, Dave.
K9RX - Gary All Messages By This Member #6532 Dave, Yes - the functionality is the same. The pinout is the same.? Do you know which version firmware is in the Gen3?? Gary? toggle quoted message Show quoted text ------ Original Message ------ From "Dave Lillis" <dlaighleis@...> To [email protected] Date 4/29/2023 8:34:05 PM Subject [ServoCAT] goto button v2 vs v3 Hi, Ive a quick question about V2 and V3 servocats. I've a V2 that has a goto cable/button plugged into the aux/ag port, is uses 2 of the positions in the 6 core RJ11 port and works perfectly, should this also work on the V3? ? I've tried in on another scope that has a V3, but cant get it to to work. :( ? Thanks, Dave.
Dave Lillis All Messages By This Member #6533 sory Gary, the RJ11 connector was bad, I made up a new one and now it works fine, thanks for your quick response. :)
K9RX - Gary All Messages By This Member #6534 Super - glad to hear it was something (relatively easy.? take care. g. toggle quoted message Show quoted text ------ Original Message ------ From "Dave Lillis" <dlaighleis@...> To [email protected] Date 4/30/2023 5:53:41 PM Subject Re: [ServoCAT] goto button v2 vs v3 sory Gary, the RJ11 connector was bad, I made up a new one and now it works fine, thanks for your quick response. :)

Previous Topic Next Topic