开云体育

Change right-Left button to move vertically and Up/down buttons to move horizontally : is it possible ?

Raphael Guinamard All Messages By This Member #7496 Dear all, The light path on my dob is a little special as my secondary is tilted more than 45° to send light toward the bottom of scope (because it is a 36"). I had a 90° diagonal just before eyepiece and I changed it recently to a 120° diagonal to have a better eye position. See picture below. With the 90° diagonal the Right/Left button was not horizontal but tited. Same for Up/down. Now with the 120° diagonal, I have noticed that the R/L buttons move the stars up/down and that the up/down move the stars right/left. So not easy for the brain to manage...! I know you can reverse R and L or U and D, but is there a possibility to convert the R/L button to U/D movement and U/D to R/L ? If not, I will have to hold the handpad rotated 90°. Not a big deal, but If the function exist to convert horizontal button to vertical movement, I would prefer... Note that the servocat is guiding correctly, I believe -without being sure- that it's my light path that generate this problem. Thanks for feedback Regards Rapha?l ?
K9RX - Gary All Messages By This Member #7497 Raphael, No - sorry. That functionality isn't in there and would not have been considered since, now decades later, you're the only one to have asked for and shown a need for it. It would have been confusing to others that would have inevitably tried it?:? ) g. toggle quoted message Show quoted text ------ Original Message ------ From "Raphael Guinamard via groups.io" <rguinamard@...> To [email protected] Date 4/12/2025 11:08:38 AM Subject [ServoCAT] Change right-Left button to move vertically and Up/down buttons to move horizontally : is it possible ? Dear all, The light path on my dob is a little special as my secondary is tilted more than 45° to send light toward the bottom of scope (because it is a 36"). I had a 90° diagonal just before eyepiece and I changed it recently to a 120° diagonal to have a better eye position. See picture below. With the 90° diagonal the Right/Left button was not horizontal but tited. Same for Up/down. Now with the 120° diagonal, I have noticed that the R/L buttons move the stars up/down and that the up/down move the stars right/left. So not easy for the brain to manage...! I know you can reverse R and L or U and D, but is there a possibility to convert the R/L button to U/D movement and U/D to R/L ? If not, I will have to hold the handpad rotated 90°. Not a big deal, but If the function exist to convert horizontal button to vertical movement, I would prefer... Note that the servocat is guiding correctly, I believe -without being sure- that it's my light path that generate this problem. Thanks for feedback Regards Rapha?l ?
Raphael Guinamard All Messages By This Member #7498 开云体育 Thanks Gary I understand. No problem , I will just rotate the (wireless) hand pad in my hand.? Regards Raphael? Envoyé à partir de De : [email protected] <[email protected]> de la part de K9RX - Gary via groups.io <amateurK9RX@...> Envoyé : Sunday, April 13, 2025 12:12:28 AM ? : [email protected] <[email protected]> Objet : Re: [ServoCAT] Change right-Left button to move vertically and Up/down buttons to move horizontally : is it possible ? ? Raphael, No - sorry. That functionality isn't in there and would not have been considered since, now decades later, you're the only one to have asked for and shown a need for it. It would have been confusing to others that would have inevitably tried it?:? ) g. toggle quoted message Show quoted text ------ Original Message ------ From "Raphael Guinamard via groups.io" <rguinamard@...> To [email protected] Date 4/12/2025 11:08:38 AM Subject [ServoCAT] Change right-Left button to move vertically and Up/down buttons to move horizontally : is it possible ? Dear all, The light path on my dob is a little special as my secondary is tilted more than 45° to send light toward the bottom of scope (because it is a 36"). I had a 90° diagonal just before eyepiece and I changed it recently to a 120° diagonal to have a better eye position. See picture below. With the 90° diagonal the Right/Left button was not horizontal but tited. Same for Up/down. Now with the 120° diagonal, I have noticed that the R/L buttons move the stars up/down and that the up/down move the stars right/left. So not easy for the brain to manage...! I know you can reverse R and L or U and D, but is there a possibility to convert the R/L button to U/D movement and U/D to R/L ? If not, I will have to hold the handpad rotated 90°. Not a big deal, but If the function exist to convert horizontal button to vertical movement, I would prefer... Note that the servocat is guiding correctly, I believe -without being sure- that it's my light path that generate this problem. Thanks for feedback Regards Rapha?l ?

Previous Topic Next Topic