开云体育

Gary, When Dave K. recommended Mallincam cameras for his Obsession customers I took the bait. The Mallincam DS series of cameras only have a backfocus of 17.5mm.? This means no modification was

Gary, Can you shorten the tube length? The purpose of the truss system is to hold the secondary mirror at the correct focal length away from the primary mirror. Seems to me if the focal length is

Hi Gary, again lol. Now that I read you have an F5 mirror you may not need to shorten your truss tube unless as Jack said you use a focal reducer. My scope is an F3.3 so It was built with an

Gary

Hi Gary. I own a Meade LightBridge 12" F5 (as you probably recall), mostly for visual, but recently trying to turn it into an EAA platform - that's why I was asking about the ASIAir. I had no

Gary, When I first started using MallinCam cameras on my 17.5” TeleKit, I had to shorten the truss poles 1” to allow the scope to focus when using a focal reducer on the camera. Without the focal

Hi Gary, If I remember correctly I did not need to shorten my truss poles initially when I was using my camera only (asi294MCPro) and cona corrector. It was only after I wanted to try using a nexus

Hello all... so - there are a few guys on here that have done imaging using their Obsession or similar dob. I'm curious what I should expect to have to do with the truss tube length. I have heard,

Steve, My apologies - I should have announced it. I did it. It was indeed just that discussions of ASIAir are for the moment premature. There's a lot of effort that would have to happen before it's

See here for instance: /helpcenter/ownersmanual/1/managing-group-topics-and-messages/locking-topics

Steve, in other forums some threads are locked to prevent further comments, once the original question was sufficiently answered [at moderator's judge) and to avoid confusions It seems this is would

Hi All. I just found out that my message has been locked. Probably something I did??? Anyway, I tried to find out how to unlock it, but to no avail. Can anyone help?? ?Please! Steve

Sounds great. Hope you can finally get outside soon. Steve [email protected]> wrote:

Its been some time since I had the 12" set up... it's now sitting in our "smallish" living room... as a test for it - while waiting for a clear night. When I get up in the morning I'll find a galaxy

Raphael, I'm guessing - looking at the picture - it is about 2.6" in length ... which would be 66mm. Whichever is closest to the number you see for the length. g.

Mike doesn’t seems to be around Could anyone tells me if the units in his .stl file are in inch or mm ? I could only open this file via paint but then I don’t have the units, ?and the 3D printers

Just as a note: The ASIair is designed to be open to a good share of mounts... and I believe when we get something in place they'll be able to connect to the ServoCAT (no DSC needed, is the plan and

Steven, I think you meant to show his response but only one line was shown - was there more to it? Gary

Ricardo, Hello sir! The ServoCAT protocol 'contains' the Sky Commander protocol - which is only 2 commands - but it is very rich and diverse beyond that. There are indeed more commands and much more

Steve: First please specify WHICH component of the AN/SC system you are connecting to and changing the baud on so others are not confused. I know, as the designer, that you are not talking about the