开云体育

Thanks Steve, much appreciated. I went on and bite the bullet, and purchased an ASIAir anyway, should get delivered to Argentina in the next weeks so I will be able to perform some tests myself; if I

I apologize, Richard doesn't use the asiair, he uses the Eagle S4. Mickey

Guys this isn't my specialty either, I mean ASI/Zwo products, as I am a dob owner as well. Having looked into the Asiair and zwo products, the ASi Air will only work with ASI products, Celestron and

Hi Gary. I hope something can come of it! As I posted on the servocat forum: I am able to connect to my obsession 15" with AN/SC using: meade as startup with baud rate at 19200 on obsession Digital

Hi Ricardo. We tried using sky commander protocol in both an/sc and Asiair (at the same time) at 9600 and 19200. It seemed to connected once or twice, but never showed my location (as if it really did

I am thinking along the same way as you Steve; I still don't own a ASIAir but considering buying one (see /g/ServoCAT/topic/anybody_tried_servocat/105389837 ) if I can make it work

I’ve tried 9600 with no results. [email protected]> wrote:

Could this be a wrong baudrate issue?

FYI...Yesterday, I did connect AsiAir Plus to AN/SC. It only lasted 3-5 sec then disconnected. While connected ,AsiAir showed my location. it could only get that from the AN/SC? Until then any

is it possible, then, to have Sky SAfari run the AN/SC through SkyFi, AND, have AsiAir Plus, 'along for the ride', run the asi533mc pro camera through its own wifi to get the pix? Steve

and even STAY tuned (not stayed - argh!)

Steve, stayed tuned. We'll see where our efforts get us. Bill is right - at the moment nothing it is not supported by ASIAir. Note however you can control it directly from Sky Safari ("it" being the

I do not believe the AsiAir is compatible with ServoCAT. BC

I have an obsession 15"UC with AN/SC and can't get it to connect properly. I have AsiAir connected directly to USB-B port on SC. Iphone to WIFI to AsiAir Plus. Asi533mc Pro connected directly to

Hi Mike, Great job ! Have you ever tried these covers in hot weather ? Just wondering if the motor could heat up? with this cover. But I really don't know if this type of motor really heat or not...

Nice cover Mike. I'm going to try one out. BC

Have been meaning to post this in the group for a while now. Designed this cover in TinkerCAD. I wanted to provide some protection for the ALT motor, but also decided to put one on the AZ motor.?

I feel the SC is pretty well protected - as mentioned, it sits in the bottom of the rocker box with only the front end exposed. I have just the rocker box in the workshop right now.? My plan is to

Werner: Send an email to bill at servocat dot com. BC

Hello Gary, I am looking for a complete?set?of?ServoCat controller?(including motors, cables,…)??for a new telescope project. I am already operating an 18" and a 22" with your Gen3 controller