开云体育

Hi Gary, First - there is life! I was referring to the internal power LED.? All switches are in the up position, and only the power was connected. But there is life, so this is good!? Poking around

Note additionally. I don't like it when people suggest things like "'de-oxy' the pins on all cables". It's not too unusual for issues to show when people do this. Unplug all cables to the ServoCAT

Mike, First it is highly unlikely you've damaged it - at least not to the "brick" state. IF there is anything going on it can be repaired. First - when you say the power led - are you talking about an

I think I killed my ServoCAT. ?I believe it's a Gen 3, purchased 02/2011. The power in is 13.2v, the fuse on the PCB is good, and the voltage reads 13.2v on both sides of the fuse. ?The power LED

You won't see 14+V out of your LFP battery. 14.4 is a reasonable (though on the high side depending on who you ask) charging voltage. As soon as you take the battery off of the charger, you'll quickly

No problem. You can power the ServoCAT off of 11 - 16V. NOTE however other accessories, that might be connected to the PGB Power distribution rail, might not be able to handle this voltage! Also note

Eric, I run 15v into my powered ground board and have a 12v regulator in my virtual mirror box to power all my gear. The regulator accepts 8 to 24 volts in and provides up to 10 amps at 12 volts out.

I have a related question. ?Over time will these springs loose their tension? Mike

Any problem running my ServoCAT from a 14.4v battery? Thanks, Eric

Hi David: I can supply a new spring. Do you have a ServoCAT Junior or Standard? BC

Hi, Ive a quick questions, I lost the altitude tension spring for my goto system. Can I ask whats its length /specs?, so I can get another one off amazon maybe ? This is for a 15" classic obsession.

Please send an email to support at servocat dot com and we will provide a new cable. ( support@... ) Regards Bill Conrad BRC Astro LLC ServoCAT

My club has a 30”Obsession scope. ?The altitude drive cable is frayed and needs to be replaced. ?What size and type of cable do we need? thanks!

As much as I try to set it up - the group setting is for me to get individual messages... I am still not getting them --- ARGH. Sorry Fernando. Either would have worked (the only difference being the

The white box or black box Sky Commander ?? Fernando Yahoo Mail: Search, Organize, Conquer

Does anyone out there have a Sky Commander I can borrow? I tested the port yesterday and can get the CAT to respond with motion, but its not as I remembered. I'll look back at the code, but it may be

Paul, The R-Pi's don't have built in RS232 ports. They are easily added via external hardware. I find the Waveshare 2 port hat works well. You can also use the 2nd serial port on the Waveshare to feed

HW virtual serial port, will do the trick. Mickey

I am also following this topic with great interest. Mike, thanks for the mention of the EFinder groups.io group.? Are you all familiar with a product, that I believe is similar to Keith's product,

Gary did you receive my Gmail email? Mickey