开云体育

thanks for info Gary!? ?Good to know....haven't even tried or thought of connecting a computer to servocat until recently as astrophography as become more popular in the last few years with the new

I already use my SC ASCOM driver with NINA. I just need to get the platesolve sync to work. I probably flipped a sign somewhere in the math Bill - it would be great if you could update the firmware to

NOTE: PARK has been in the protocol since its release in 2015. You can see the status of PARK using the SCU (as well). [its been in the hardware, available through the REM jack, for approaching 20

here is my wish list? for a new/updated servocat driver: Park to home position (alt-az), able to sync a platesolve, support ascom with N.I.N.A here is example of what i would like to do with servocat

Congratulations Bill, that's fabulous news! Regarding the driver, I'm working out some kinks related to syncing coordinates following a plate solve. Bad weather, day job, and Hocus Focus have been

Here is the link to George’s new Servocat driver: Release v0.8.0.0 · ghilios/ASCOM.ghilios.ServoCAT github.com

George Helios has built a new modern Servocat driver that works with all software I’ve tried it with. It is great because it can work with or without ASCOM and can support multiple software

Thank you for taking this over. Mike Amateur Astronomer Deputy Solutions Manager https://mikehotka.com

Agreed - this is outstanding news!!! wrote:

Congratulations, Bill! Best wishes for the future of ServoCAT and many happy years ahead! Sincerely, Charlie Starks Markless? Astronomics <http://www.marklessastronomics.com/>

Great news! I second Filippo post….tech knowledge is changing for alt-az mounts relating to astrophotography Dave

I have personally to say that this is a very great announcement. I just kindly ask you to think about a new driver in order to let the system of working with the other astronomy softwares. This way

*It is time to formally announce that the ServoCAT product will continue to be manufactured by BRC Astro, LLC.* This is Bill Conrad of BRC Astro, LLC. My wife Robin and I are currently re-modeling our

Jim, My apologies for missing this. Write to me direct using rxdesign at ssvecnet dot com and I'll send you instructions. There is a nice way to install the cable on UC's, especially the 15 and 18.

I have the Obsession 15" f4.2 UC and the altitude bearing cable has come off its altitude bearing. Anyone have good directions on how this can get reinstalled? I have some poor directions about using

Super - glad to hear it was something (relatively easy. take care. g.

sory Gary, the RJ11 connector was bad, I made up a new one and now it works fine, thanks for your quick response. :)

Dave, Yes - the functionality is the same. The pinout is the same. Do you know which version firmware is in the Gen3? Gary

Hi, Ive a quick question about V2 and V3 servocats. I've a V2 that has a goto cable/button plugged into the aux/ag port, is uses 2 of the positions in the 6 core RJ11 port and works perfectly, should

That's a sweet setup you got there, Richard!! Fernando