开云体育

Hi, I recently bought a mount with servocat3 and argo-navis. Unfortunately I didn't get the CD with software: servocat-sky. Anyone know where I can obtain it? The stellarcat site doesn't have any

Ever since I used thread locker (blue type) from locktite I have had no issue with my rotating contacts coming loose. Thanks for such a fun product (powered ground board , ServoCAT, and the interface

Gary, Can you pass along the schematic or other design info? Thanks Mike

I actually designed a box that has build in super capacitors totaling I believe if I recall 2F. It is enough to ride through a momentary drop out. Of course one should put the effort in to find what

I have considered that adding a bank of capacitors in the rocker box would provide fault tolerance to the rotating contacts. Richard

This problem has now been successfully resolved.? It was the rings on the PGB.? When Mike Zammit built my scope in 2020, he was sourcing the rings from a third party (not StellarCat).? He

All, if my telescope had gps coordinates, knew where North and where the Zenth was could Argo Navis and ServoCAT do away with a 2 star alignment and support remote observing? Richard

Good morning all and happy new year... So as has been reported here due to 2 factors I've decided to retire. First covid has made it for all practical purposes impossible to get parts. Parts that have

Gary, I have reached out to Mike and expect to speak with him after his holiday vacation.? Thanks, Paul

Paul,? Just re-read your initial post: StarStructure does not use any of our PGB hardware - check with Mike on this. Gary Myers StellarCAT

Many many thanks Gary very sorry that you had to write the whole thing out again! Soul destroying. Dale

Hi Dale, It was a pity my original response got lost. Even more so because I had spent considerable time composing it into what would have clearly been the best response to any question ever asked on

Thanks Wes.? Paul

Hi Gary, Happy Christmas mate. Sadly your initial response appears lost! I have attached Martin Lewis's notes that he made when trying to control my scope with his ipad. I have now recreated the set

Hey Paul, I had a similar problem with “Zamar” ; fully SDM Pimped 20” Ob classic . For better or worse I chose the largest lithium AA batteries for the AG. Stopped the problem dead ??

Many thanks Gary I really appreciate your support. I’m sure that once I get it set up and use it a couple of times to ingrain I will be fine.

Hi Dale, I just spent time authoring a response but when I hit Reply to Group, I could not see it and backing up didn't give me the ability to retrieve. If for some reason my response does not appear,

Hi all I'm trying to set up Sky Safari on an ipad running through a Skywire to control my 24" Dob. I'm very poor with technology so I apologise in advance. I think I have connected to serial port 2

Everyone, many thanks for the quick replies.? I did not have batteries in the AN before this (which is why I discovered the issue!) but I do now.? We hosted a star party last night and the issue did

Paul, Indeed as mentioned the issue is in the powered option to the ground board. This is invariably caused by a not quite right installation ... I will send you a list of things to check starting