开云体育

George Helios has built a new modern Servocat driver that works with all software I’ve tried it with. It is great because it can work with or without ASCOM and can support multiple software

Thank you for taking this over. Mike Amateur Astronomer Deputy Solutions Manager https://mikehotka.com

Agreed - this is outstanding news!!! wrote:

Congratulations, Bill! Best wishes for the future of ServoCAT and many happy years ahead! Sincerely, Charlie Starks Markless? Astronomics <http://www.marklessastronomics.com/>

Great news! I second Filippo post….tech knowledge is changing for alt-az mounts relating to astrophotography Dave

I have personally to say that this is a very great announcement. I just kindly ask you to think about a new driver in order to let the system of working with the other astronomy softwares. This way

*It is time to formally announce that the ServoCAT product will continue to be manufactured by BRC Astro, LLC.* This is Bill Conrad of BRC Astro, LLC. My wife Robin and I are currently re-modeling our

Jim, My apologies for missing this. Write to me direct using rxdesign at ssvecnet dot com and I'll send you instructions. There is a nice way to install the cable on UC's, especially the 15 and 18.

I have the Obsession 15" f4.2 UC and the altitude bearing cable has come off its altitude bearing. Anyone have good directions on how this can get reinstalled? I have some poor directions about using

Super - glad to hear it was something (relatively easy. take care. g.

sory Gary, the RJ11 connector was bad, I made up a new one and now it works fine, thanks for your quick response. :)

Dave, Yes - the functionality is the same. The pinout is the same. Do you know which version firmware is in the Gen3? Gary

Hi, Ive a quick question about V2 and V3 servocats. I've a V2 that has a goto cable/button plugged into the aux/ag port, is uses 2 of the positions in the 6 core RJ11 port and works perfectly, should

That's a sweet setup you got there, Richard!! Fernando

It might be wishful thinking / hoping for advanced features on the new product that ?is in development now to continue where the ServoCAT design left off. ? We wont find out the feature list until

Richard you mention a rumor about being able to do remote Argo two star alignment next year with next upgrade. Do you mean a firmware release for Argo that is coming? This is the first I’ve heard of

Hi all, When I purchased my UC18 i ordered it without the ServoCAT or powered ground board and enjoyed visual observing. The Argo Navis helped me find all those fun objects. ?Describing my views to

Ok will do. Thanks Mike Sent: Monday, March 20, 2023 5:56 PM To: [email protected]; [email protected] Subject: Re: [ServoCAT] Bug found: Gen2 ServoCAT and ServoCAT-Sky file when upgrading to version

Hi Gary, I have problem with upgrade you may recall. No rush, spring is April in Montana, so when caught up let me know if this will help thanks Leroy AB7CE Sent: Monday, March 20, 2023 3:55 PM To:

Hi Mike - again apologies for that. Write to me direct and we can discuss this. g.