¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Locked Re: Ian Falloon's book R90S

 

¿ªÔÆÌåÓý

I have a copy I could part with. Write offline if interested.

Doug

?

From: [email protected] <[email protected]> On Behalf Of Donald Walter
Sent: Saturday, March 27, 2021 3:04 PM
To: [email protected]
Subject: [R90SWORLDNET] Ian Falloon's book R90S

?

Interested in obtaining or at least reading this book but its proven very hard to find. Suggestions appreciated.


Locked Instrument cluster hex nuts

Donald Walter
 

The 16mm tach and 18mm speedo hex nuts - are they intended to be placed on the instrument stems before attaching the respective cables, then wound down against the top of the cable's threaded attachments to keep them from unwinding? May also prevent water ingress? I see no function for them if wound up against the bottom of the instruments.


Locked Ian Falloon's book R90S

Donald Walter
 

Interested in obtaining or at least reading this book but its proven very hard to find. Suggestions appreciated.


Locked Re: R90S seat pan

 

Sri,

I have an original R90/6 seat pan in very good condition and the original factory molded foam rubber that's in useable condition.

If you're interested feel free to contact me offline at oldbmws@...

Ted

On Wednesday, March 24, 2021, 09:17:43 PM EDT, sri_nair@... <sri_nair@...> wrote:


I'm going to go with the option that will allow me to ride soon. My mechanic is also a welder and he's going to make the existing seat pan work maybe for another 5 years! Thank you all for your input. Much appreciated.

Sri


Locked Re: R90S seat pan

 

I'm going to go with the option that will allow me to ride soon. My mechanic is also a welder and he's going to make the existing seat pan work maybe for another 5 years! Thank you all for your input. Much appreciated.

Sri


Locked Re: R90S seat pan

 

Would anyone know if the Corbin seat pan for the R90S will work with the foam made for the stock seat? I've got an old Corbin seat that I'm hoping will work. It is made of some kind of hard plastic.


Locked Re: R90S seat pan

 

Thanks Bob. It would have worked just fine if they would ship to Canada. Probably why I didn't see it when I checked ebay. It definitely is in better shape than mine.


Locked Re: R90S seat pan

 

I believe you can buy a poly-somethingorother seat pan which will never rust out.

Contact Sargent in Florida and see what they tell you about your dilemma.? I've had them re-foam and cover my seats twice with great results.





Good luck.

James Wiseman
ProServUS Investigation
PO Box 802
Burlington, IA 52601
319-750-4199

The truth will set you free.

NOTICE: This email and any attachments are covered by the Electronic Communication Privacy Act. The information may be confidential. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution or copying of this communication is strictly prohibited. Please reply to the sender that you have received this message in error, then delete it. Thank you for your cooperation.


On Wednesday, March 24, 2021, 4:45:19 PM CDT, Antonio Frova via groups.io <afrova@...> wrote:


Siebenrock sells the 90S seat pan, take a look here:







Il mercoled¨¬ 24 marzo 2021, 22:40:34 CET, <rockersbmw@...> ha scritto:


Sri

?

Just saw this on ebay¡­might be an option for you.

?

?

Bob

?

From: [email protected] <[email protected]> On Behalf Of rockersbmw via groups.io
Sent: Wednesday, March 24, 2021 4:34 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

FYI- A R69S is a /2 of the 1960s and will not fit a R90S of the 1970s

?

Bob Alexander

?

From: [email protected] <[email protected]> On Behalf Of Doug Raymond
Sent: Wednesday, March 24, 2021 4:28 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

By coincidence a fellow in Albuquerque just wrote that he has a seat pan, free to a good home except for shipping cost. But it¡¯s from an R69S and not in great shape. I have no idea if it would fit.

More details and his contact info if you have any interest, email me at douglas.t.raymond@...

Doug

?

From: [email protected] <[email protected]> On Behalf Of sri_nair@...
Sent: Wednesday, March 24, 2021 4:20 PM
To: [email protected]
Subject: [R90SWORLDNET] R90S seat pan

?

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked Re: R90S seat pan

 

Siebenrock sells the 90S seat pan, take a look here:







Il mercoled¨¬ 24 marzo 2021, 22:40:34 CET, <rockersbmw@...> ha scritto:


Sri

?

Just saw this on ebay¡­might be an option for you.

?

?

Bob

?

From: [email protected] <[email protected]> On Behalf Of rockersbmw via groups.io
Sent: Wednesday, March 24, 2021 4:34 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

FYI- A R69S is a /2 of the 1960s and will not fit a R90S of the 1970s

?

Bob Alexander

?

From: [email protected] <[email protected]> On Behalf Of Doug Raymond
Sent: Wednesday, March 24, 2021 4:28 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

By coincidence a fellow in Albuquerque just wrote that he has a seat pan, free to a good home except for shipping cost. But it¡¯s from an R69S and not in great shape. I have no idea if it would fit.

More details and his contact info if you have any interest, email me at douglas.t.raymond@...

Doug

?

From: [email protected] <[email protected]> On Behalf Of sri_nair@...
Sent: Wednesday, March 24, 2021 4:20 PM
To: [email protected]
Subject: [R90SWORLDNET] R90S seat pan

?

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked Re: R90S seat pan

 

¿ªÔÆÌåÓý

Sri

?

Just saw this on ebay¡­might be an option for you.

?

?

Bob

?

From: [email protected] <[email protected]> On Behalf Of rockersbmw via groups.io
Sent: Wednesday, March 24, 2021 4:34 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

FYI- A R69S is a /2 of the 1960s and will not fit a R90S of the 1970s

?

Bob Alexander

?

From: [email protected] <[email protected]> On Behalf Of Doug Raymond
Sent: Wednesday, March 24, 2021 4:28 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

By coincidence a fellow in Albuquerque just wrote that he has a seat pan, free to a good home except for shipping cost. But it¡¯s from an R69S and not in great shape. I have no idea if it would fit.

More details and his contact info if you have any interest, email me at douglas.t.raymond@...

Doug

?

From: [email protected] <[email protected]> On Behalf Of sri_nair@...
Sent: Wednesday, March 24, 2021 4:20 PM
To: [email protected]
Subject: [R90SWORLDNET] R90S seat pan

?

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked Re: R90S seat pan

 

¿ªÔÆÌåÓý

FYI- A R69S is a /2 of the 1960s and will not fit a R90S of the 1970s

?

Bob Alexander

?

From: [email protected] <[email protected]> On Behalf Of Doug Raymond
Sent: Wednesday, March 24, 2021 4:28 PM
To: [email protected]
Subject: Re: [R90SWORLDNET] R90S seat pan

?

By coincidence a fellow in Albuquerque just wrote that he has a seat pan, free to a good home except for shipping cost. But it¡¯s from an R69S and not in great shape. I have no idea if it would fit.

More details and his contact info if you have any interest, email me at douglas.t.raymond@...

Doug

?

From: [email protected] <[email protected]> On Behalf Of sri_nair@...
Sent: Wednesday, March 24, 2021 4:20 PM
To: [email protected]
Subject: [R90SWORLDNET] R90S seat pan

?

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked Re: R90S seat pan

 

¿ªÔÆÌåÓý

By coincidence a fellow in Albuquerque just wrote that he has a seat pan, free to a good home except for shipping cost. But it¡¯s from an R69S and not in great shape. I have no idea if it would fit.

More details and his contact info if you have any interest, email me at douglas.t.raymond@...

Doug

?

From: [email protected] <[email protected]> On Behalf Of sri_nair@...
Sent: Wednesday, March 24, 2021 4:20 PM
To: [email protected]
Subject: [R90SWORLDNET] R90S seat pan

?

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked R90S seat pan

 

Hi all, I was intending to replace the seat foam and cover on my seat and had a rude surprise with the condition of the seat pan. The repair would probably cost enough that I should consider a whole new seat. So I'm reaching out to the group in the hope that someone may have a seat pan in decent shape for sale.

Thanks?
Sri Nair
Toronto, Canada


Locked Re: More re My Home Made Bag Bracket, Showing Threaded End

 

¿ªÔÆÌåÓý

I made mine out of a bit of steel rod. ?Much easier to bend and just filed the ends square.?


On 24/03/2021, at 8:02 AM, Mac Kirkpatrick <drbeemer73@...> wrote:

?
Solid steel so there is space to drill and tap the ends for the attachment bolts. Then real good paint.


Mac Kirkpatrick
Glenmoore, PA

"After all, what is adventure, but inconvenience, properly regarded?"
C. Donahue


On Tue, Mar 23, 2021 at 12:12 PM Jerry Hale <halejl@...> wrote:
Thanks Mac. The pictures make it not look to difficult. Is it made of rod or tubing? Aluminum or steel?

Jerry Hale






Locked Re: More re My Home Made Bag Bracket, Showing Threaded End

 

Solid steel so there is space to drill and tap the ends for the attachment bolts. Then real good paint.


Mac Kirkpatrick
Glenmoore, PA

"After all, what is adventure, but inconvenience, properly regarded?"
C. Donahue


On Tue, Mar 23, 2021 at 12:12 PM Jerry Hale <halejl@...> wrote:
Thanks Mac. The pictures make it not look to difficult. Is it made of rod or tubing? Aluminum or steel?

Jerry Hale






Locked Re: My Home Made Bag Bracket

 

Nice bracket ...and plate :-)


Locked Re: More re My Home Made Bag Bracket, Showing Threaded End

 

Thanks Mac. The pictures make it not look to difficult. Is it made of rod or tubing? Aluminum or steel?

Jerry Hale


Locked Re: More re My Home Made Bag Bracket, Showing Threaded End

 

I love those security bolts on your license plate! Very slick. ?


Locked More re My Home Made Bag Bracket, Showing Threaded End

 


Locked My Home Made Bag Bracket