开云体育

Thanks all for the feedback regarding the Whiny tach. The other day I removed the assembly and took it apart as far as I could without actually removing the hypoid gear on the shaft. I was able to

My bike did not have a cross brace, an essential part to prevent the bags from "waving" like the wings of a bird, which will lead to failure of the racks. I made one, it is U shaped with two holes

The panniers move a lot if the crossbrace is not fitted.?Problem with the brace is they are hard to find unless you can make one.RegardsSent from my Galaxy

Do all of the racks supposed to have the brace piece in the rear? I am getting ready to install some racks that came on my ‘74 before I restored it. They are black and have the rack that bolts to

*got the panniers fitted!

I’ll send some pictures later this week when I’ve hit the panniers fitted and before I cut the bar! Thanks Neil

Hi, I wouldn't cut the indicator bar until I found out what is wrong. The bar is not meant to be cut!I believe that I have the same frame, and I believe that it was made by Krauser, not BMW. These

Should have posted a picture with the bar on!!Sent from my Galaxy

I agree. I was sorry that I fitted it but did need the extra carrying capacity at the time. I did weld up a support bracket that fitted underneath it but despite this developed two cracks in the

This is mineSent from my Galaxy

To answer Peter, I’m going to cut the indicator bar as Warren suggested so I’ve already started stripping the lights down. I haven’t got the rear catches fitted yet but when I do I’ll share a

Never seen one yet that hasn't cracked to the edge on both holesSent from my Galaxy

I have that rack as well! Thanks for tip, I’ll make sure not to load it up too much Neil Wetherall neil.wetherall@... +44 7710 142 540

A pet peeve of mine are the rear racks that also sit on the rear edge of the cosling, or worse yet, have a provision to drill into the cowling for two bolts to fit through. The cowling is not at all

A side view of the frames. I confess I made these up myself and didn’t include the curved bar over the rear shock that attaches to the rear footpeg bracket.

This is how mine sit. Perhaps show us a picture of your frames

Thanks Warren, much appreciated

There are different length bars. You can shorten yours. Plumping tube cutter. Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Sunday, March 21, 2021 8:03:03 AM To:

I'm hoping someone can help me, I have purchased some used pannier frames for my r90s. They are black painted not chrome. The problem is that if I fit them flush with the rear fitting that sits on the

Thanks Marty. I was thinking there or the starter relay. Jerry Hale