开云体育

Mark, Here is the photo I posted some time ago on this site under photos. [email protected] | Photo ( /g/ObsessionUsers/photo/0/60209.450.0?p=Taken%2C%2C%2C20%2C1%2C20%2C0 ) I

Jim: Awesome! Thanks! Mark

Mark Check this site out for mask making: Bahtinov Mask Drawings generator webApps (satakagi.github.io) <https://satakagi.github.io/tribahtinovWebApps/Bahtinov.html> Jim Sent: Wednesday, January 10,

Richard: Did you print your own mask? I've been looking but haven't found anything that approaches 18". Or did you use a smaller mask just mounted on something to hold it in place? Maybe show us a

Hi Steve, I cut 3 small slots so the mask can balance on the 3 struts of my upper tube assembly.? Basically, the mask sits just above the secondary. Then adjust focus so the spikes are symmetrical.

Hi Richard. I hope your holidays went smoothly. Just another silly question, were does your Bahtinov Mask sit on your scope? No pun intended, but I'm a visual guy. Happy Holiday and Happy New Year.

LeNhance Filter with my UC18 and DS10cTEC

Hi Steve, no filters were used. 10 second exposure for 10 live stacks (100 seconds). ?Used a Bahtinov mask to achieve best focus ( focus is crucial ). Post processed with Pixinsight (dynamic crop,

Hi Richard. Great picture. I really enjoy seeing your work Did you use any filters when taking the frames (Optolong L=ultimate, dual band filters?) If so, how many separate stacks? Or was it all done

M100 is being enhanced with the new version of Pixinsight BlurXTerminator with the AI version 4.

Hi Richard. Thanks for your response. It helps to clarify a lot (in between the cobwebs that usually occupy my head). I am continuing my research online. As always, I appreciate your time, Steve

HI Steve, I do not have a guide camera and do not plate solve (yet).? Stellarium gives you a map of the sky and shows you where your telescope is currently pointing.? Just pick your next target by

Hi Richard. So your words: 'So to “drive” my rig you just click on the Stellarium target and hit F2 and the Telescope will slew to that location.? Then pop over to MallincamSky and fine tune the

Richard, Thanks again for the clarifications. I do have more 'homework' to do. I'll keep stalking you on the forums...really enjoy seeing your images. Presently I use SkFi III and Sky Safari 7 Pro on

Steve, No problem. I so enjoy this hobby that I find it fun to show others what I to have more fun than a human should be allowed to have. Richard Sent: Saturday, December 23, 2023 8:41 PM To:

Steve, I have to do 2 things before the telescope is ready for remote control: 1. Do 2 star alignment 2. Place the Argo Navis into “From Planetarium” mode. The Eagle loads and runs: 1.

Richard, ALSO, I appreciate your time in talking to me, a complete novice dipping his toes into getting a handle on EAA and or AP. Steve

Richard, So you still need to do two star alignment (at least), before the other electronics kicks in? Or, the Eagle 4 Win10 NUC 'run the ASCOM based software that controls the telescope and

Steve, This image was post processed with 3 programs: 1. GraXpert to remove the background gradient induced by all my Bortle 7-8 light pollution from Atlanta in my west (free software). 2. Pixinsight