开云体育

Bob, ?Thanks so much?for the info. You got some steps from an old ladder (donation?ladder)??to add to your astronomy ladder, ?Do you remember how you got the steps off the donation?ladder?

I did not risk removing the factory steps. Just added some in. Do remember that any modifications to the ladder will probably void any manufacture warranty/liability. That being said, it is a lot more

Hello, I just joined this group.? I was a member of the old group and have missed the postings.? I own a 25" F/5 Classic Obsession and have been saving for a tripod ladder.? Unfortunately I guess I

All, So I pulled out my jig saw and crudely cut out my Bahtinov mask for my UC18 from from 1/8" plywood left over from a furniture project (since I still don't have compelling reasons to purchase a

I figured out I needed to also configure the ServoCat telescope with my details before it would accept. Richard Richard Miller 33.51N 83.59W UC18 & DS287m ________________________________ Sent:

Hello Richard, In step 7, click on the round grey "Choose" button which has the words "ASCOM.Simulator.Telescope" below it, like in the left hand picture of the guide.? This should bring up a drop

Thanks Frederic, I am not that far yet. ?I am replacing my laptop that does have Stellarium controlling my ServoCat and just can’t remember how I got past this issue last year. ?My ServoCat has

Hi Richard, at least what I know is that this kind of question needs much more information about your configuration to trigger insightflul advice. What I would do, is start to check that everything

Greg, I installed the ASCOM driver for ServoCat and I?can’t get step 7 of the Stellarium to ServoCat to offer me theServoCat.Telescope when configuring the device hub setup. Any advice? Richard

Check out the Obsession Argo Navis/ ServoCAT guide in the files section ( /g/ObsessionUsers/files ) of this group.? If you have not set up the location etc of your observing site,

Thanks everybody. I did contact Gary and problem solved. Turns out the latest version of SC has a feature that prevents trying to track below the horizon. He suggested I check the data in the system.

Hi Donald, as Richard says, the best is to get in touch with Gary from stellarcat. He will help you for sure. And he knows AN almost as well as Gary from Argonavis (wildcard innovations). Frederic

Hi Donald, I have seen this before on mine (UC18, SC, AN) and I let the object drift to one side of my FOV and double click the handset button (the opposite direction of the drift) to re-center and

Hi I have had several Morpheus eyepieces. They are great eyepieces!! The 9 and 12.5 and 17 especially. You can’t go wrong with them. I have also have a 10 mm Delos and that line is excellent as well

I have never looked through a Morpheus.? But a question: Why would the Morpheus be an 'upgrade'? Ok maybe a slightly larger AFOV.? However I HAVE used?Radians and they have 20mm of eye relief and

I have a 10mm Ethos, saving up for a 17mm Ethos for my 15”.

I use the Ethos eyepieces and love them. Bought them as they were released. I have some of the Morpheus EPs but have not used them in my Obsession. Nicely made eyepieces though.

I have the 36mm Badder aspheric and love it. I also have a 13mm Ethos and am saving up for a 21mm Ethos. Crhis

Anyone using Baader Morpheus EP's with a big-fast DOB? Been thinking about going to very wide Afov's with my Obsession 15" Classic. I do have the 31 & 22 Nags and love them, but I have a collection of

Hi all, i am new to the group and want to make mosaics and wondered in anyone in the group has automated their astrophoto work flow with their ServoCat? Richard UC18 DS287m