开云体育

There is a new test version HRI-TEST.zip in the files section.

Version 17 MAR 2017.

This allows FLOW CONTROL settings options for all radios that use a regular RS232 COM Port.? (Not available for CI-V controlled radios).? In the past HRI always used No Flow Control.

For Icom Marine Radios, I was forcing Flow Control to NONE, RTS always ON, and DTR always ON.? Regardless of whether you checked or didn't check RTS or DTR in the settings, for ICOM Marine Radios. HRI acted like both were checked.? Now ICOM Marine Radio owners can experiment to see what works best for them, but remember that in the past it was always No Flow Control, RTS ON, and DTR ON.

It's also possible that some Kenwood Radio models might work better with RTS Flow Control if the radio has a real RS232 CAT control port on the radio.

If I do not get complaints, these changes will be in the future regular Visual Studios HRI.

Regards,

Howard

Пятница, 17 марта 2017, 21:00 +03:00 от "Howard Z" <HowardZ@...>:

There is a new test version HRI-TEST.zip in the files section.

Version 17 MAR 2017.

This allows FLOW CONTROL settings options for all radios that use a regular RS232 COM Port.? (Not available for CI-V controlled radios).? In the past HRI always used No Flow Control.

For Icom Marine Radios, I was forcing Flow Control to NONE, RTS always ON, and DTR always ON.? Regardless of whether you checked or didn't check RTS or DTR in the settings, for ICOM Marine Radios. HRI acted like both were checked.? Now ICOM Marine Radio owners can experiment to see what works best for them, but remember that in the past it was always No Flow Control, RTS ON, and DTR ON.

It's also possible that some Kenwood Radio models might work better with RTS Flow Control if the radio has a real RS232 CAT control port on the radio.

If I do not get complaints, these changes will be in the future regular Visual Studios HRI.

Regards,

Howard

Howard,

I have tested today's 17 MAR 2017 test version of HRI with USB to Clone port of IC M710 cable with HRI set for no flow control.

Radio controls work but as usual the M710 report backs of radio settings are iffy. I have learned to live with the M710 report backs being iffy. I have been meaning to try the remote M710 homebrew cable again to see if the M710 report backs are still solid there but HRI has allowed me to be too busy playing Ham Radio to try it.

Setting M710 radio functions via USB to Clone port cable is still rock solid 100%

DM780 (named after a computer invented in my home town I think) still works. Fldigi using RigCat works. WSJT-X using HamLib still works.

I just made a JT9 contact with RN6AJ [KN93] Sochi Russia using today's test version of HRI with VSPE and WSJT-X.

Thanks Howard and Nikolay