开云体育

ucxLog -> K3 control

Ern? Ogonovszky All Messages By This Member #38 Hi Gerben, I intend to use my ucxLog logging tool to control the K3 TRX. To set the TRX parameters I can choose the TRX K3. For setting the Key/PTT control, are following options: PTT+Key Line,?Only Key Line, No Line, WinKey Port1, WinKey Port2. Whitch setting is correct? Thank You in advance. 73, Ern?
Ronald PA3EWP All Messages By This Member #39 Hello Erno, Give me some time to figure it out. The coming days I will install UCXlog and find out how to configure it. I can test it for my K3 + Microkeyer MK2 interface and for a ICOM radio with USB cable. (I have a IC9700, it must be the same as a IC9300). Gerben are you also using the Microham driver for CAT and CW? 73 Ronald PA3EWP -----Oorspronkelijk bericht----- Van: [email protected] <[email protected]> Namens Ern? Ogonovszky via groups.io Verzonden: woensdag 31 augustus 2022 10:48 Aan: Ern? Ogonovszky <[email protected]> Onderwerp: [Madagascar2022] ucxLog -> K3 control Hi Gerben, I intend to use my ucxLog logging tool to control the K3 TRX. To set the TRX parameters I can choose the TRX K3. For setting the Key/PTT control, are following options: PTT+Key Line,?Only Key Line, No Line, WinKey Port1, WinKey Port2. Whitch setting is correct? Thank You in advance. 73, Ern?
Gerben A.Menting - PG5M All Messages By This Member #41 Hi Ronald, I use a microHam USB interface III for interfacing with the K3. Regards, Gerben toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Ronald PA3EWP via groups.io Sent: Wednesday, 31 August 2022 21:26 To: [email protected] Subject: Re: [Madagascar2022] ucxLog -> K3 control Hello Erno, Give me some time to figure it out. The coming days I will install UCXlog and find out how to configure it. I can test it for my K3 + Microkeyer MK2 interface and for a ICOM radio with USB cable. (I have a IC9700, it must be the same as a IC9300). Gerben are you also using the Microham driver for CAT and CW? 73 Ronald PA3EWP -----Oorspronkelijk bericht----- Van: [email protected] <[email protected]> Namens Ern? Ogonovszky via groups.io Verzonden: woensdag 31 augustus 2022 10:48 Aan: Ern? Ogonovszky <[email protected]> Onderwerp: [Madagascar2022] ucxLog -> K3 control Hi Gerben, I intend to use my ucxLog logging tool to control the K3 TRX. To set the TRX parameters I can choose the TRX K3. For setting the Key/PTT control, are following options: PTT+Key Line,?Only Key Line, No Line, WinKey Port1, WinKey Port2. Whitch setting is correct? Thank You in advance. 73, Ern?
Ern? Ogonovszky All Messages By This Member #45 Thank you Ronald, 73, Ern?, DK2AMM Am 31.08.2022 um 21:25 schrieb Ronald PA3EWP via groups.io: toggle quoted message Show quoted text Hello Erno, Give me some time to figure it out. The coming days I will install UCXlog and find out how to configure it. I can test it for my K3 + Microkeyer MK2 interface and for a ICOM radio with USB cable. (I have a IC9700, it must be the same as a IC9300). Gerben are you also using the Microham driver for CAT and CW? 73 Ronald PA3EWP -----Oorspronkelijk bericht----- Van: [email protected] <[email protected]> Namens Ern? Ogonovszky via groups.io Verzonden: woensdag 31 augustus 2022 10:48 Aan: Ern? Ogonovszky <[email protected]> Onderwerp: [Madagascar2022] ucxLog -> K3 control Hi Gerben, I intend to use my ucxLog logging tool to control the K3 TRX. To set the TRX parameters I can choose the TRX K3. For setting the Key/PTT control, are following options: PTT+Key Line,?Only Key Line, No Line, WinKey Port1, WinKey Port2. Whitch setting is correct? Thank You in advance. 73, Ern?

Previous Topic Next Topic